This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside of the microwave whil...
$22.00
In Stock
Order within the next 51 mins and your part ships today!
This light bulb socket that is used in microwaves. The socket is meant to fit small-base light bulbs. * Please note: The light bulb is not included with this part and is sold separately. If the follow...
$23.29
In Stock
Order within the next 51 mins and your part ships today!
The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open (normally opened). The switch monitors the door latch position, and communicates w...
$45.34
In Stock
Order within the next 51 mins and your part ships today!
The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notice that this part is ...
$17.46
In Stock
Order within the next 51 mins and your part ships today!
This charcoal filter is for microwaves.
Charcoal filter removes cooking odors from air that circulates through the microwave vent.
Follow the instructions in your owner's manual when installing this part.
$23.73
In Stock
Order within the next 51 mins and your part ships today!
Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door before doing this). Rem...
$37.02
In Stock
Order within the next 51 mins and your part ships today!
This is the glass cooking tray for your microwave. It rotates your food to ensure it cooks evenly. It is made of glass, and as a result, it can occasionally crack or break entirely. In this case you w...
$51.57
In Stock
Order within the next 51 mins and your part ships today!
Order within the next 51 mins and your part ships today!
Questions And Answers for JVM6175DF1BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jan
December 1, 2019
Please provide instructions to replace the ps8755556 control panel.Thank you.
For model number JVM6175DF1BB
Hello Jan and thanks for writing.
use a Phillips head screwdriver to
unthread the two mounting screws
securing the grill with the screws
unthreaded open the oven door then slide
the grill to the left and lift it up to
remove next remove the control panel
mounting screw lift the control panel up
to detach note the orientation of the
wires connect it to the control board
then depress the locking tabs if
necessary to disconnect the wires
remove the screws securing the grounding
wire and set the control panel on a
sturdy surface release the ribbon
connector now and thread the mounting
screws securing the main control board
to the housing with the screws removed
lift out the board prepare the new
control panel for installation by
removing all of the protective coverings
make sure the new switch cable is
inserted through the hole in the control
board housing then position the board in
the housing thread the screws to secure
the ribbon connector secured the
grounding wire to the control board
housing reconnect the remaining wires to
the appropriate terminals on the board
now insert the control panel tabs into
the slots in the frame and push the
panel down replace the mounting screw to
secure insert the tabs on the grille
into the slots in the frame and slide
the grille to the right rethread the
mounting screws with the repair
completed plug the power cord back in
and your microwave oven should be ready
for use, We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Yarima
December 10, 2023
My microwave is giving me a message I-6 sensor food and it won’t stop beeping, I had to disconnected what part do I need to replace ?
For model number JVM6175DF1BB
Hello Yarima, thank you for asking. We would recommend turning the breaker off for a minute and if the issue did not reset, you will need to replace the control panel, part number PS8755556. We hope this helps!
Why do I have a dim control panel light. It is difficult to read the control panel time.
For model number JVM6175DF1BB
Hello Charlie, Thank you for your inquiry. It can be caused by either clouded glass on the control panel-which you can check by removing it, or the control board display is failing and the board will need to be replaced. We hope this helps.
Used reheat and opened door too soon resulting in sensor error appearing on the display. Troubleshooting doesn't say how to fix it. Only says don't do it. We tried unplugging it and plugging it in again after a while. Seemed to work ok once, but then sensor error was back. Help!
For model number JVM6175DF1BB
Hello Linda, Thank you for the question. Here is the steps for clearing the Code from GE. "Step 1
Check to see whether the microwave door is open or if you or someone else pressed "Start/Pause" before any steam appeared during a cooking cycle. Step 2 Close the door, if open. Step 3 Press "Start" immediately." We hope this helps!
Was this helpful?
Thank you for voting!
Carol
April 5, 2023
What switch is making my microwave run when we open the door,?,just started this tonight
For model number JVM6175DF1BB
Hello Carol, thank you for reaching out. It appears that your microwave may have a damaged monitor door switch. We recommend you replace the door interlock switch, part number PS237422, to fix the issue. Good luck with your repair!
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on
... Read more this model was the only difficult part. First use a torx bit to remove the two torx screws below the latches inside the microwave. This frees the latching part inside, that holds the door switches, which you will remove after you take off the control panel. The top grill has to come off before you can remove the door panel. Remove the screws above the grill, on the microwave top cover, The grill on this model is covered with a panel that moves out when it vents. After removing the two top screws, the covered grill vent slides left to remove. Be careful, as the sliding tabs are plastic. Wiggle and jiggle it, to slip it off. Below the removed grill, is a small metal grill with one screw in lower center. Remove that screw, and wiggle that out. You'll then see the one screw that holds on the control panel. Remove this screw, and lift the control panel up to remove. Again, go slowly and gently, as the bottom tabs holding the control panel in, are also plastic and easily broken. Lay the control panel on something, (I used the coffee maker) and pull out the wire bundles tucked on the left, that are attached to the latching panel. Wiggle the latching panel gently to lift it up off of it's plastic tabs and pull it out towards you, so you can see the three door switches. Each switch (part number WB24X829) has a little black switch on it. Feel each switch with either your finger, or a screwdriver to see which one doesn't "click" strongly. The weak one is the one you will replace. The door switches are fitted into a tab, and plugged into their wires. Remove the defective switch, pull out the wires, and replace it with the new switch, plugging back the wires, and slipping it back into it's plastic tabs. Then put everything back together in reverse order. The entire job took me fifteen minutes EXCEPT for figuring out how to slide off the upper grill, which I have told you. A repairman would have cost $150, the part was $18. AND, there's a good chance, the other two switches will get "used up" in the next year or so as well, so I'll be ready next time. Thank you, Partselect, why work all day, to make money, only to give it to somebody else, for fifteen minutes of work. All I needed was the knowledge.
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged t
... Read morehe wires and took it out. Simply replaced socket, fastened bottom cover of microwave, installed new bulb and closed lens cover.
At first I tried to use pliers to unscrew the base,very uncomfortable working position,upside down and backwards(the microwave is installed over the range top)very limited space for your body and arms to manuver and you really cant see the base,all of this took place after the breaker was turned off ofcourse,finally figured out that you c
... Read morean drop the entire bottom housing of the microwave by unscrewing 6 screws and the light sockets are easily accessable once you lower it,take out 1 retaining screw ,remove the entire socket and unscrewed the broken base and replaced the bulbs,I said bulbs,there is no sense in having to replace another bulb in who knows how long since only one had burned out but they were both the same age