JVB94SH1SS General Electric Range Hood - Overview
Sections of the JVB94SH1SS
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Membrane Switch
PartSelect #: PS953533
Manufacturer #: WB24X10115
This part is the replacement membrane switch for your range hood. It is approximately 4 inches in length, and the part of the switch that you push is black in color. The membrane switch or downdraft v...
No Longer Available
Downdraft Vent Grease Filter
PartSelect #: PS951921
Manufacturer #: WB02X10932
The model may require two of these.
No Longer Available
Lead Wire Jumper
PartSelect #: PS953115
Manufacturer #: WB18X10224
When ordering this part you must order also order the switch membrane and the trim.
No Longer Available
Manuals & Care Guides for JVB94SH1SS
Click to downloadQuestions And Answers for JVB94SH1SS
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the JVB94SH1SS
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Downdraft wouldn't work at all..... broken sensor
I pulled up the wires that the membrane switch hooks to and connected the new one with the new sensor pushed them down the opening. Took the sticky paper off the up and down button and stuck it too the indentation where it goes and there you have it as good as new! Works great!
Parts Used:
-
Richard from Chardon, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Raise and lower switch stopped working on downdraft power vent
In the process of diagnosing the problem, the circuit board burned out and the fan switch broke. Had a great deal of difficulty removing the unit. Had to disconnect gas line to range top and remove it first before I could remove the downdraft unit. I still had to get some crazy glue to hold down new microswitch on top of the unit. It
... Read more
is finally working fine now.
Read less
Parts Used:
-
Louis from Lorton, VA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
21 of 41 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
putting membrane switch in
Received membrane switch quick after I ordered it. Connected switch to downdrafts system in less than 15 minutes. Tested system to make sure it worked. very happy with partsselect shipped quickly after ordering.
Parts Used:
-
jeffrey from hickory, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!