JPIFC736RL00 Range - Overview
Models starting with JPIFC736RL00
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$21.45
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.47
In Stock
Terminal Block
PartSelect #: PS11747341
Manufacturer #: WP9761958
This is the terminal block for the power cord on an electric range.
$29.47
In Stock
Cooktop Cleaner
PartSelect #: PS3492527
Manufacturer #: W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a l...
No Longer Available
Light Bulb
PartSelect #: PS11749457
Manufacturer #: WPW10169757
This is a replacement light bulb to illuminate the inside of your oven. It is 25 watts and 120 volts. Please wear gloves during replacement if your existing bulb is shattered. Consider ordering a spar...
$48.45
In Stock
Broiler Pan with Roasting Rack
PartSelect #: PS1519212
Manufacturer #: W10123240
This is a 3 piece set.
$82.56
In Stock
Range Ground Screw
PartSelect #: PS11742546
Manufacturer #: WP4449743
Sold Individually.
$7.47
In Stock
Refrigerator Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.47
In Stock
Thermostat
PartSelect #: PS11742549
Manufacturer #: WP4449751
This high-limit thermostat is a safety-critical component designed to prevent overheating in ranges and wall ovens. It monitors internal temperatures and cuts power to the heating elements if the oven...
$91.74
In Stock
Cabinet Roller - Front and Rear
PartSelect #: PS11748930
Manufacturer #: WPW10138054
Sold individually.
$35.80
In Stock
Common Symptoms of models starting with JPIFC736RL00
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bought floor model with loose cord that melted block terminal
Safety first always shut breaker off at box.
I unplugged stove, disconnected wires keeping in mind the color placement. Unscrewed one ground screw and removed terminal block. Attached new block with ground screw, replaced wires in correct order, re-attached plug. Then reattached safety cover. Pretty simple for d.i.y.
I unplugged stove, disconnected wires keeping in mind the color placement. Unscrewed one ground screw and removed terminal block. Attached new block with ground screw, replaced wires in correct order, re-attached plug. Then reattached safety cover. Pretty simple for d.i.y.
Parts Used:
-
larry from alexandria, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
19 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned Out Termincal Block
I discoverd my switch box locked with my stove electrical port and stove stopped functioning. Pulled my stove back and saw that the "terminal block" was melted on one side; hence, switch box locked in place to avoid a fire, thank goodness. Looked up part on internet, unplugged stove, took off terminal box, ordered part and replaced. BT
... Read more
W - PART SELECT is awesome; I received my part the very next day!!! :-) Very happy with their service.
Read less
Parts Used:
-
Jeffrey from Davie, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
16 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
someone did not install cord properly! they left a strong strain on one of the 3 wires, with a loose nut connection that caused it to heat and melt the plastic that poped out toward the rear metal cover and short circuited.
I cut the ends of the cord and went with direct wire (no round eye clip) to the back side of the terminal block and tightened firmly. It took about 20 Minutes.
Parts Used:
-
Richard from Daytona Beach, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
16 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!