Models > JGP636CEV1CC

JGP636CEV1CC General Electric Cooktop - Overview

Sections of the JGP636CEV1CC

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Surface Burner Spark Electrode – Part Number: WB13K18
Surface Burner Spark Electrode
★★★★★
★★★★★
(2)
PartSelect #: PS231276
Manufacturer #: WB13K18
This part helps your burner ignite and produce flame.
$41.95
  In Stock
SCREW – Part Number: WB1K5062
SCREW
PartSelect #: PS234148
Manufacturer #: WB1K5062
$11.59
  In Stock
Screw – Part Number: WB1M1
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$7.76
  In Stock
Burner Bowl  Seal – Part Number: WB32M10
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
  No Longer Available
Foam Rubber Tape – Part Number: WB02X26088
Foam Rubber Tape
★★★★★
★★★★★
(2)
PartSelect #: PS11726663
Manufacturer #: WB02X26088
This is foam tape and it is usually used in conjunction with your range, specifically on the cooktop. Its purpose is to help seal the edges of the cook top to the counter top. Another of its functions...
$39.82
  In Stock
Gas Pressure Regulator – Part Number: WB19T10078
Gas Pressure Regulator
★★★★★
★★★★★
(2)
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane. This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
  In Stock
Screws - Package of 12 – Part Number: WB1X500D
Screws - Package of 12
PartSelect #: PS234746
Manufacturer #: WB1X500D
These are replacement screws designed to fit your range. They are made of metal and are approximately ¼ inch long. They come in a package of 12. These are OEM parts sourced directly from the manufacturer.
$9.12
  Special Order
Single Liquid Propane Orifice Spud - Medium Burner – Part Number: WB28K145
Single Liquid Propane Orifice Spud - Medium Burner
PartSelect #: PS240769
Manufacturer #: WB28K145
Sold Individually. Order quantity needed.
  No Longer Available
Spark Electrode Mounting Clip – Part Number: WB1K56
Spark Electrode Mounting Clip
PartSelect #: PS234286
Manufacturer #: WB1K56
$8.06
  In Stock
Ignition Spark Switch - Rear Burners – Part Number: WB24K5083
Ignition Spark Switch - Rear Burners
★★★★★
★★★★★
(1)
PartSelect #: PS236639
Manufacturer #: WB24K5083
$26.53
  In Stock
Ignition Valve Switch - Front Burners – Part Number: WB24K5078
Ignition Valve Switch - Front Burners
PartSelect #: PS236635
Manufacturer #: WB24K5078
$37.42
  In Stock
Liquid Propane Orifice Spud – Part Number: WB28K146
Liquid Propane Orifice Spud
★★★★★
★★★★★
(1)
PartSelect #: PS240770
Manufacturer #: WB28K146
  No Longer Available

Questions And Answers for JGP636CEV1CC

Be the first to ask our experts a question about this model!

Common Symptoms of the JGP636CEV1CC

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner igniter needed to be replaced
Assumed the entire top of the range would have to be lifted off. Removed the three screws inside the top of the over door and then noticed the two screws holding the dish around the burner. They were tight and required WD-40 and then a sharp tap and came off.
Important: Notice the direction your old igniter is plugged into the wire. It is not clear and can go on either way.
Parts Used:
Surface Burner Spark Electrode
  • Thomas from Bloomsbury, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
37 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Parts Used:
Burner Bowl Seal
  • Steve from Broken Arrow, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement cook-top, had natural gas orifices, needed propane
Three were simple screw out and replace with a nut driver. The warming burner had a smaller opeining which was too large for the nut driver. Had to remove shielding aroound it first. Simple, job. My mother did the last one.
Parts Used:
Single Liquid Propane Orifice Spud - Medium Burner
  • Aloha from Monterey, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!