Models
>
JGP631ER2WG
JGP631ER2WG General Electric Cooktop - Overview
Sections of the JGP631ER2WG
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
No Longer Available
Large Burner Drip Bowl
PartSelect #: PS244366
Manufacturer #: WB31M11
This part is sold individually. It is white on the top side, and black underneath. Used for gas ranges. You may need to order the drip bowl seal.
No Longer Available
Ignition Spark Switch - Rear Burners
PartSelect #: PS236639
Manufacturer #: WB24K5083
$26.53
In Stock
Small Burner Drip Bowl
PartSelect #: PS244365
Manufacturer #: WB31M10
This part is sold individually. It is white on the top side, and black underneath.
No Longer Available
Ignition Valve Switch - Front Burners
PartSelect #: PS236635
Manufacturer #: WB24K5078
$37.42
In Stock
Large Burner Trim Ring
PartSelect #: PS256025
Manufacturer #: WB7M8
This trim ring is white on the top side and black underneath.
$31.37
Special Order
Surface Burner Igniter
PartSelect #: PS231310
Manufacturer #: WB13K5051
This igniter is used to light the top surface burner on a range/stove. It is sold individually.
No Longer Available
Questions And Answers for JGP631ER2WG
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JGP631ER2WG
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Parts Used:
-
Steve from Broken Arrow, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
18 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Failed ignition switch
took me a a while to find my problem. One burner would not spark to ignite gas burner. From Part Select website I noticed the part that was the problem from the parts diagram. I did not realize it was related to ignition until I saw that. Easy and cheap to fix after that.
Parts Used:
-
wally from lake oswego, OR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
6 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large and small Burner Drip Bowls needed to be replaced
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use
... Read more
a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
Read less
Parts Used:
-
Nelda from Carmichael, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!