JGP5530SL1SS General Electric - Overview
Models starting with JGP5530SL1SS
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Grate Foot
PartSelect #: PS2353327
Manufacturer #: WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
$16.09
In Stock
Spark Igniter
PartSelect #: PS11736298
Manufacturer #: WB13X27058
Also known as spark electrode. This part helps your burner ignite and produce flame.
$66.19
In Stock
SPARK MODULE
PartSelect #: PS17872541
Manufacturer #: WB13X46909
This module provides reliable ignition. Replace if burners stop sparking. This part is designed to keep your appliance operating reliably and efficiently. Replacing a worn or failing component helps p...
$75.92
In Stock
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$57.67
On Order
Control Knob Seal
PartSelect #: PS227132
Manufacturer #: WB04T10015
Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.
$27.94
Special Order
Common Symptoms of models starting with JGP5530SL1SS
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner wouldn't light
I removed the old igniter by working a thin screwdriver under the edge of the igniter, and carefully prying it up. I then used pliers to pull off the electrical wire. Connected up the new igniter, and pushed it back into the hole. A very simple repair.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
Read less
Parts Used:
-
Jeffrey from Freehold, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
53 of 63 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grate Foot had worn out
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Parts Used:
-
Kathryn from Star City, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing Spark Igniter
Pulled the old one out. Disconnected the wire. Repaired the frayed wire cover with Liquid Tape. Connected the wire. Inserted the new part into the hole. This is after installing a new spark module earlier. But that was dumb easy too. So for about $100 bucks in parts and an hour of my time I saved myself the appliance repairman money and
... Read more
agonizing scheduling and dealing with them for the price of gold. I also replaced all the gaskets on the burners in that time. It so easy even a financial planner could do it.
Read less
Parts Used:
-
RICHARD from HERNDON, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!