Models > JDRP430WP01

JDRP430WP01 Jenn-Air Range - Overview

Sections of the JDRP430WP01

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Inner Door Glass – Part Number: WP4449259
Inner Door Glass
★★★★★
★★★★★
(77)
PartSelect #: PS11742543
Manufacturer #: WP4449259
This inner door glass is a heat resistant part that fits into a stove, oven, wall oven, cooktop, or range as the inner glass panel of the appliance door. The glass panel allows you to see the items be...
$101.14
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$19.99
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.76
  In Stock
Temperature Sensor – Part Number: WPW10131825
Temperature Sensor
★★★★★
★★★★★
(6)
PartSelect #: PS11748765
Manufacturer #: WPW10131825
The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty tempe...
$83.97
  In Stock
Terminal Block – Part Number: WP9761958
Terminal Block
★★★★★
★★★★★
(12)
PartSelect #: PS11747341
Manufacturer #: WP9761958
This is the terminal block for the power cord on an electric range.
$37.84
  In Stock
Screw – Part Number: W10491985
Screw
★★★★★
★★★★★
(4)
PartSelect #: PS3651485
Manufacturer #: W10491985
Sold individually.
$7.76
  In Stock
Grate Feet - Kit of 4 – Part Number: W10185266
Grate Feet - Kit of 4
★★★★★
★★★★★
(2)
PartSelect #: PS2330208
Manufacturer #: W10185266
This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted w...
$13.68
  In Stock
Temperature Probe – Part Number: WP9755542
Temperature Probe
★★★★★
★★★★★
(1)
PartSelect #: PS11747165
Manufacturer #: WP9755542
Also known as a meat probe.
$91.95
  In Stock
Light Bulb – Part Number: WPW10169757
Light Bulb
★★★★★
★★★★★
(3)
PartSelect #: PS11749457
Manufacturer #: WPW10169757
This is a replacement light bulb to illuminate the inside of your oven. It is 25 watts and 120 volts. Please wear gloves during replacement if your existing bulb is shattered. Consider ordering a spar...
$32.50
  On Order
Oven Door Gasket – Part Number: W10877014
Oven Door Gasket
★★★★★
★★★★★
(12)
PartSelect #: PS11759723
Manufacturer #: W10877014
This part is the replacement door gasket for your oven. It is made of gray rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insula...
$76.13
  In Stock
Screw – Part Number: WP3196163
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11740977
Manufacturer #: WP3196163
This screw is sold individually.
$7.76
  In Stock
SCREW – Part Number: W11404293
SCREW
★★★★★
★★★★★
(2)
PartSelect #: PS12741703
Manufacturer #: W11404293
Sold individually.
$15.22
  In Stock

Questions And Answers for JDRP430WP01

Ask our experts a question about this model and we'll get back to you as soon as possible!

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    John
    November 21, 2021
    Control panel is dark with occasional flicker can not use oven Thanks
    For model number JDRP430WP01
    Hello John, thank you for your question. We have researched the model you have provided, and we would suggest the Control, Electric, part number PS11749059. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    BILL
    October 12, 2022
    AFTER TURNING ALL CIRCUIT BREAKERS OFF. AND AFTER ROUTER REPAIR AND TURNING ALL BREAKERS BACK ON: THE OVEN CONTROL ONLY DISPLAYS "JENN AIR" AND NON FUNCTIONING BUTTONS BELOW. ADDITIONAL BREAKER RESETS HAD THE SAME RESULTS
    For model number JDRP430WP01
    Hi Bill, Thank you for your question. If the electronic control board is only displaying Jenn-Air, and you have already reset the range, you will need check the wall outlet and the electronic control board. Try plugging a different appliance into the outlet that the range was plugged into to see if it works. If it is faulty, it will need to be replaced. If the outlet is fine, check the electronic control board for signs of damage, wear, scorching or burn marks. If it shows any of these signs it will need to be replaced. The part number listed under your model number for the electronic control board is PS11755154. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the JDRP430WP01

      [Viewing 7 of 7]
      Oven is too hot
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Little to no heat when baking
      Fixed by
      these parts
      Show All
      Oven not heating evenly
      Fixed by
      these parts
      Show All
      Element will not heat
      Fixed by
      these parts
      Show All
      Will not program
      Fixed by
      these parts
      Show All
      Door won’t open after self cleaning cycle
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Broke the glass panel inside the oven door -- dropped a baking dish on the glass!
      Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reattached the door to the oven. Cleaning the inside of the door took longer than the actual repair!
      Parts Used:
      Inner Door Glass
      • Robert from Wildwood, MO
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      225 of 275 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Cracked the inner door glass by wiping with wet rag when hot
      Removed the oven door by following the straightforward instructions in the user's manual. Removed philips head screws to take the door assembly apart. Removed clips holding the two inner door glass plates, and the two plates. Removed the clamp holding the broken glass plate, then the glass and associated glass fragments. Then cleaned and re-installed the three glass plates and their clamps in reverse order. Re-assembled the door and re-attached to the oven. Only cautionary note is to be careful when removing, handling and re-installing the various glass plates. Watch out for fragments from the broken plate; they can cut you and/or fall on the floor.
      Parts Used:
      Inner Door Glass
      • James from Renton, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      65 of 74 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      cracked iner door glass
      Important note: hinges are left and right do not mix them up or door will not re-assemble properly and you'll get to do it twice.

      Steps I took:

      Removed the oven door per the instructions in the oven operator manual. Removed several screws to release the interior steel liner.

      Removing the steel liner was a bit of a hassle, Had to manipulate it to get it loose but it eventually came away from the stainless steel exterior door panel.

      Disassembled the interior glass layers, there are three. The glass you need to replace is the last layer, of course. removed and discarded the broken glass. Note: the interior glass is not secured by a bracket or screws, it is held in place by compression of the interior steel liner and a another liner that is inside the door assembly (you'll figure this out when you dis-assemble).

      Another note: there is a fluffy material gasket between these two liners, use care when you disassemble or the fluffy gasket will turn into confetti.

      Take the opportunity to clean all glass and parts of the accumulated oven grease.

      Re-assembled door and re-installed...looks good.

      Another note, getting the door back together requires a little patience because there are clamping overlaps of the steel liner to the SS exterior door panel. Be prepared to jockey things around a little and make sure all your screw holes are all lined up before you begin to button it up. Remember, hinges are left and right they are not interchangeable.
      Parts Used:
      Inner Door Glass
      • william from albuquerque, NM
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      44 of 50 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!