Quick Question!

Have you ever purchased from PartSelect.com before?

Models > J2BP85BEL1BB

J2BP85BEL1BB General Electric Range - Overview

Get Parts and Repair Help for J2BP85BEL1BB

If you know the range repair part you need, you can browse the list of all parts on the J2BP85BEL1BB, or you can search by name or part description. You can also find your part by where it is located on the J2BP85BEL1BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for J2BP85BEL1BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.80

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

Order within the next 7 hrs and your part ships today!
$44.17

Flat Style Oven Igniter Kit

The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to heat your oven. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.

Order within the next 7 hrs and your part ships today!
$6.15

Top Burner Spark Electrode

The top burner spark electrode, also known as a range surface burner igniter, is designed for use in your gas range. The function of this part is to provide the spark that lights t...

Order within the next 7 hrs and your part ships today!
$45.18

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for easy access. Racks can become rough and discolored over time and may need to be replaced, or perhaps you just need extra storage space in the oven! This repair is extremely simple and does not require any tools. Before you begin, ensure that the rack edges are straight and have not warped from shipment. Once the oven door is open, the stop end goes in first and it simply slides into place.

Order within the next 7 hrs and your part ships today!
$20.64

Burner Head - Medium - 9500

This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igni...

Order within the next 7 hrs and your part ships today!
$14.19

Small Burner - 5K

Sold individually.

Order within the next 7 hrs and your part ships today!
$7.19

Foot - Leveller

Sold individually.

Order within the next 7 hrs and your part ships today!
$1.29

Cooktop Mounting Screw

Order within the next 7 hrs and your part ships today!
$3.38

SCREW

Sold Individually.

Order within the next 7 hrs and your part ships today!
$3.60

CLIP ELECTRODE

Sold individually.

Order within the next 7 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The igniter glowed, but never got hot enough to ignite the propane, so I did smell propane.

  • Customer: Sidney from Marysville, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 637 of 660 people found this instruction helpful
First, I removed the two screws that held the heat shield in place. Second, I removed the one screw that held a small wire covering. That covering kept the wires inside the back wall of the range. Third, I removed the two screws that held the Igniter Kit, and unplugged it from the back of the range. I then carefully put the new igniter in, and reassemble... read more

oven would not light or keep temp.

  • Customer: zack from corning, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 432 of 438 people found this instruction helpful
first I thought it was a faulty gas valve, so I pulled it out, started researching for a replacement part, found your site and started research. I discovered thhat the igniter was the culprit, that info. saved me about a week of time and a 100 bucks, so I installed the gas safety valve back in the oven, patience is the word for the day, you cross thread thi... read more

Oven wouldn't heat. This degraded over several weeks.

  • Customer: Durwood from Suffield, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 290 of 365 people found this instruction helpful
1. Pulled the 110V power plug. It was not necessary to turn off the gas; just be careful not to stretch or pinch the flexhose behind the stove.
2. Removed the oven door by opening a couple of inches then lifting upward.
3. Removed the warming drawer by pulling out to the stop, then pushing the small levers on the side of the track to release.
read more