IR250 - Overview

DRAIN VALVE

★★★★★

★★★★★

(1)

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is ... Add to cart

FILTER INTAKE This is an authentic OEM part. The filter is used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The foam filter is used to prevent dirt and debris from entering and potentiall...

ORING 2.759/2.719ID O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes f... Add to cart

NUT .563-18 UNF HEX This is an authentic replacement part that has been OEM sourced to be used with Porter Cable, DeVilbiss, and Black and Decker air compressors. The metal nut is commonly used to connect the outlet tube... Add to cart

Reverse Valve Knob Screw This is a genuine OEM part. The Ingersoll Rand reverse valve knob screw is compatible with the 231C 1/2" Drive Air Impact Wrench. The metal screw fastens the reverse valve knob onto the housing, and i... Add to cart

Reverse Valve Knob This is a genuine OEM replacement part used with many impact wrenches. The reverse valve knob is fastened to the bushing in the motor housing assembly, assisting with the direction of the drill bit. T... Add to cart

ASSY NUT SLEEVE 3/8 This is a genuine replacement part manufactured for use with air compressors from DeWalt. This part creates an airtight seal between the elbow and the tube. You may need a wrench to replace this part... Add to cart

VALVE SAFETY 150 .12 This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions and does not turn the motor off when the amount of pressure ... Add to cart

KIT CONNECTING ROD L

★★★★★

★★★★★

(1)

This rod kit is an original part from Craftsman for air compressors. This part attaches to the piston to the crankshaft that is in the pump. This kit includes the following: cylinder head, piston, cyl...

Socket Retainer The socket retainer fits between the ring and the pushing. This is made of metal and is available as an individual replacement part. It is a genuine item that is supplied by the original equipment man... Add to cart

ADAPTER .25 NPT X .2 This is an OEM part sourced directly from the manufacturer. The adapter is designed for use in compressors from DeVilbiss, Black & Decker, Delta, and Porter Cable. This part is made of metal, and ma... Add to cart

BOLT .375-16X2.25 UN Used to secure the wheels on a compressor or generator, this Shoulder Bolt is roughly 3.75 inches long and is sourced directly from the original equipment manufacturer. It is made of dark grey metal,...