HMV3021U Bosch - Overview
Models starting with HMV3021U
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
SWITCH
PartSelect #: PS8728111
Manufacturer #: 00617228
This switch is a replacement electrical component designed to control power or operational states. It is commonly replaced when activation becomes unreliable, intermittent, or fails completely.
$10.24
In Stock
FILTER-GREASE
PartSelect #: PS8730871
Manufacturer #: 00648879
This grease filter captures airborne grease from ventilation airflow to protect internal components. Regular replacement helps maintain proper airflow and cleaner operation. Replacing a clogged filter...
$15.36
In Stock
Common Symptoms of models starting with HMV3021U
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuse Blows when door is opened
Replaced fuse and switches.This is an undercabinet microwave.
The fuse is located in top right but there is no access from the front of the microwave necessitating complete removal of the microwave from the cabinets and then taking the microwave cover off.
This is a terrible design,
Instead, I cut the vent grate on the top ... Read more right front of the microwave to access the fuse.
replaced the fuse.
Switches were relatively easy to replace...being careful to not pull wires out of connectors or breaking small plastic tongs and clips.
Microwave is still blowing fuses though. door alignment may be off.
Again, terrible design and lousy product quality.
The fuse is located in top right but there is no access from the front of the microwave necessitating complete removal of the microwave from the cabinets and then taking the microwave cover off.
This is a terrible design,
Instead, I cut the vent grate on the top ... Read more right front of the microwave to access the fuse.
replaced the fuse.
Switches were relatively easy to replace...being careful to not pull wires out of connectors or breaking small plastic tongs and clips.
Microwave is still blowing fuses though. door alignment may be off.
Again, terrible design and lousy product quality.
Read less
Parts Used:
-
STEPHEN from SAN MATEO, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
8 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked front door panel
Taking the door apart is fairly easy. However, transferring the glass panel to the new door is complicated. I took an hour to figure out that the new plastic door panel must be curled and spread apart in order to get the glass in the plastic tabs that secure it.
Parts Used:
-
ALAN from RYE, NH
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!