Models
>
HDS355
HDS355 Bosch Range - Overview
Sections of the HDS355
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Broil Element
PartSelect #: PS8714970
Manufacturer #: 00436789
This broil element is found on the roof of ovens and ranges, it generates the heat required for the broil function of your appliance. If your oven will not get hot when the broil function is selected,...
$234.81
In Stock
Questions And Answers for HDS355
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broiler element stopped working
Step 1: Call the appliance store and ask the repairman to look at the problem.
Step 2: Wait 10 days.
Step 3: Have repairman tell you the broiler element stopped working. He states he will order the new part and charges $80 for the visit.
Step 4: Wait 4 weeks, then call the repairman and have him tell you the part is backord ... Read more ered.
Step 5: Wait another 4 weeks, periodically calling the repairman to be told assorted stories about the backordered part.
Step 6: Go to partselect.com, and within 10 minutes order the part.
Step 7: Receive the part in 2 DAYS.
Step 8: Remove the old broiler element (only 4 screws to remove) and slide off the 2 electrical connections.
Step 9: Connect the new broiler element, push the electrical wires back into the panel and replace the 4 screws.
Step 10: Tell the repairman to go to ****
Step 2: Wait 10 days.
Step 3: Have repairman tell you the broiler element stopped working. He states he will order the new part and charges $80 for the visit.
Step 4: Wait 4 weeks, then call the repairman and have him tell you the part is backord ... Read more ered.
Step 5: Wait another 4 weeks, periodically calling the repairman to be told assorted stories about the backordered part.
Step 6: Go to partselect.com, and within 10 minutes order the part.
Step 7: Receive the part in 2 DAYS.
Step 8: Remove the old broiler element (only 4 screws to remove) and slide off the 2 electrical connections.
Step 9: Connect the new broiler element, push the electrical wires back into the panel and replace the 4 screws.
Step 10: Tell the repairman to go to ****
Read less
Parts Used:
-
Wayne from GLASTONBURY, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!