This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your w...
This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram f...
This rod and spring assembly is designed to fit with washing machines and is made by the original manufacturer of your washer. It is a part of the washer suspension system that helps to stabilize and ...
This is a manufacturer-made suspension rod and spring assembly for your washing machine. This suspension rod is one of four suspension rods that make up the entirety of the inner suspension of your wa...
This drive belt is sourced from the original manufacturer for use in various models of dryers. It is a rubber belt that connects the motor to the transmission of the washer. It enables the drum to spi...
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, ...
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is us...
This is an inlet valve for models of compatible washing machines. Inlet valves are electrically controlled solenoid valves that open and close as needed during the washing cycle, to allow water into t...
This part helps prevent the backflow of water from the tub to main water line.
$12.55
In Stock
Questions And Answers for GTW680BSJ0WS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 19, 2019
The washer says only cancel and no other buttons work, so makes the noise, but no spinning.
For model number GTW680BSJ0WS
Hi George,
Thank you for your question. If the washer is not spinning, there are some parts that you will need to check to see which one is causing the issue. Here are some links from our website that you may reference on what parts to check, https://www.partselect.com/Repair/Washer/Will-Not-Spin/ and https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=GTW680BSJ0WS&mfgModelNum=&fkMfgID=2&ModelMasterID=846671&PID=26. It could be the door lock as it does fix this issue the majority of the time, but try unplugging the washer to reset it to see if this helps. If not, check the parts listed in the links provided as well as the control panel and the electronic control board to see which part is causing the issue. We hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ludwig
December 23, 2019
Water leaks in through the detergent dispensing tray, about a drop every 3-5 seconds. When i close the cold water supply valve, external to the unit, the leakage stops. The problem may be a passing water supply valve and i cannot find the part number or supplier for that. Please advise. Thank you.
For model number GTW680BSJ0WS
Hi Ludwig, thank you for your question. Here is the part number for your water inlet valve: PS12171559. Good luck with your repair.
Wash cycle starts then moments later it stops. Error code message appears
5E. This occurs on various cycles.
For model number GTW680BSJ0WS
Hi Joe, thank you for the question. The 5E error indicates that you have an issue with the draining system. The most common reason for this error is a kinked internal drain hose, part number PS11729495. We would recommend checking the internal drain hose for any blockage. If that is not the case, you may need to replace the drain pump, part number PS12723115, to fix the issue. We hope that helps!
Washer is making a grinding noise along with a clicking sound when it starts a cycle
For model number GTW680BSJ0WS
Hi George, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the transmission, part number PS16729511, to fix the issue. We hope this solves your problem!
Machine automatic started running on its own will not turn off unless you unplug it. Does not add water acts like it is in spin cycle . No lights on panel.
For model number GTW680BSJ0WS
Hello, Thank you for your question. Looking at this model number there is a chance it experienced a surge and stopped working. I see a lot of people say allow the washer to run for the cycle and shut off, and it typically seems to function normal again after that. We hope this helps.
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps
... Read morefrom pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
Use putty knife to unlock top panel from base. Remove 2 bolts from back of washer holding control section. Don't take completely off. 2 bolts needs to be removed to unsecure top from base. Lastly 2 screws hold lid in place. Remove lid. Slide top panel to left just to access lid lock. Unplug sensor. 1 screw and tabs hold lock in place. Wat
... Read morech position coming out so you don't get confused putting new lock in. Squeeze tabs, replace screw. plug in sensor. Reverse procedure to put top section back together.
