GTS20IBNCCC General Electric Refrigerator - Overview
Sections of the GTS20IBNCCC
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
$20.37
In Stock
Add-On Icemaker Assembly
PartSelect #: PS10054643
Manufacturer #: IM6D
This is a complete add-on icemaker kit that is used on GE models manufactured from 1987 to present. This kit includes the water inlet valve, fill tube, ice bin, and all required hardware and tubing.
$174.89
In Stock
Door Basket
PartSelect #: PS758897
Manufacturer #: WR17X11342
This white basket attaches to the refrigerator door.
No Longer Available
Fresh Food Door Gasket - White
PartSelect #: PS759521
Manufacturer #: WR24X10122
This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
No Longer Available
Freezer Door Gasket - White
PartSelect #: PS759520
Manufacturer #: WR24X10121
This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.
No Longer Available
R134 DRIER
PartSelect #: PS12727537
Manufacturer #: WR86X25269
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
$64.76
In Stock
Fresh Food Door Handle - Bisque
PartSelect #: PS758683
Manufacturer #: WR12X10569
Handle only.
No Longer Available
Refrigerator Condenser Fan Blade
PartSelect #: PS760117
Manufacturer #: WR60X10109
$14.46
Special Order
Questions And Answers for GTS20IBNCCC
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the GTS20IBNCCC
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No Ice
After verifying that my water solenoid valve did open and close (I removed the solenoid and put my own 120vac on it and blew through it) and then I verified that I was receiving my 120vac from the ice maker itself I knew my problem was in the ice maker itself. Just removed the mounting screws holding the old ice maker and it lifted out of
... Read more
place after unplugging the unit from electrical connection at the rear of the cabinet. Reversed the process for installation. Power unit up. Bleed air out of the water line feeding the watermaker. Waited a couple of hours and my first cubes where there. Filled up quick! Thanks.
Read less
Parts Used:
-
Michael from Calvin, LA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
24 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Add and Ice maker to a Kenmore Refridgerator
Ordered the complete kit minus the water tap. Should have ordered that also. Install was difficult simply because I was not sure of the style of the fridge. No ident had been left on the unit, so I used the p;ictures in the install kit to decide the proper install. Was very quick and the parts were great. After I went under the house
... Read more
(crawl space) I found an old water tap which broke off in my hand and started spewing water. Replaced everything and it runs great. Nice kit with a lot of instructions. Fantastic ordering fromyour company. Next day delivery was unexpected.
Read less
Parts Used:
-
Philip from Cape May, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Interior light needed replaced
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Parts Used:
-
Leo from TWIN FALLS, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
22 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!