GSS25CSHHCSS General Electric Refrigerator - Instructions

removed one and replaced the other. These are the best people to do business with I have ever used for anything.

Fridge and freezer were not keeping proper temp (freezer would get too cold, fridge too warm), as the cooling coils were icing over and needed manual defrosting; it was not going thru the automatic defrost cycle. Changed out the defrost heating element, thermostat, and two temp sensors, none of that worked. It was this part (main board) that was the culprit. Eight wire harnesses to undo and re-hook, one was hard to pull out but it came out. Read and follow the anti-static instructions. To make sure, I grounded my hand with a copper bracelet that was grounded with a copper wire to the metal chassis of the fridge. I also drew out a rough sketch of the connections and numbered them all with a black fine tipped felt marker before undoing them. This finally fixed the problem.

I called out a repairman who used a laptop to troubleshoot. He charged me $119 just to come out. He told me that the control board wasn't telling the evaporator to periodically defrost and I noticed that it was encased in ice. Then, he gave me an estimate of $400 to replace the board. Breaking down the estimate, that would be $200 for labor, about 30 minutes, and another $200 for the board, however, he didn't have a replacement board in stock. Knowing that I could replace the board myself, I was happy to order the board from PartSelect and save on the $200 labor charge.

Ordered the part on a Tuesday and received the NEXT day. Slid out the damaged part and then slid in the new part!!! Excellent Service from your company and will recommend highly!!!

Slid right in; identical to original part. Took 5 seconds to install.

I pulled out the old drawer and installed the new one.
Then dumped thrice from the old drawer into the new one.

Really easy, removed top lid, removed broken Ice bucket, rinsed and inspected new ice bucket for any packing or shipping materials, installed new ice bucket & Auger assembly and installed top lid. Ice dispenser works just like it was new.
Highly recommend for replacement parts. Great customer service support, OME and speedy shipping.

This is about the easiest repair you can make. Simply pull out the old auger/bucket assembly and reinsert the new one and your done!

Simply remove the previous bucket and insert the new one.

Took old tray out put new tray in