EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

GSD2201F01WH General Electric Dishwasher - Overview

Sections of the GSD2201F01WH

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Door Gasket - White – Part Number: WD08X10057
Door Gasket - White
★★★★★
★★★★★
(21)
PartSelect #: PS958908
Manufacturer #: WD08X10057
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
$79.71
  In Stock
Order now and your part arrives by May 26
Rinse Aid Fill Cap – Part Number: WD12X10284
Rinse Aid Fill Cap
★★★★★
★★★★★
(14)
PartSelect #: PS2351824
Manufacturer #: WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
$34.74
  In Stock
Order now and your part arrives by May 26
Drain Solenoid Kit – Part Number: WD21X10060
Drain Solenoid Kit
★★★★★
★★★★★
(6)
PartSelect #: PS260117
Manufacturer #: WD21X10060
This kit includes the armature and linkage assembly.
$63.64
  In Stock
Order now and your part arrives by May 26
Motor and Pump Kit – Part Number: WD26X10013
Motor and Pump Kit
★★★★★
★★★★★
(11)
PartSelect #: PS260801
Manufacturer #: WD26X10013
This is a pump and motor kit for your dishwasher. This assembly replaces many old-style pump and motor kits that were manufactured since 1970. The instructions are included with this kit in to assist ...
$198.71
  In Stock
Order now and your part arrives by May 26
Door Latch Kit – Part Number: WD13X10003
Door Latch Kit
★★★★★
★★★★★
(10)
PartSelect #: PS259293
Manufacturer #: WD13X10003
This door latch kit is used for dishwashers.
$47.40
  In Stock
Order now and your part arrives by May 26
Drain Hose – Part Number: WD24X10014
Drain Hose
★★★★★
★★★★★
(4)
PartSelect #: PS260686
Manufacturer #: WD24X10014
This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of y...
$47.40
  In Stock
Order now and your part arrives by May 26
Timer Knob – Part Number: WD09X10024
Timer Knob
★★★★★
★★★★★
(4)
PartSelect #: PS258820
Manufacturer #: WD09X10024
Introducing a Genuine Replacement Dishwasher Timer Knob exclusively from the trusted brand, General Electric (GE). This superior-quality Timer Knob is specifically designed for your dishwasher, provid...
$13.92
  In Stock
Order now and your part arrives by May 26
Finished Access Panel – Part Number: WD27X10225
Finished Access Panel
PartSelect #: PS1481947
Manufacturer #: WD27X10225
Discover the value of the GE Finished Access Panel. This essential component is specifically designed to cover and shield the wiring and components at the bottom front of your dishwasher. Crafted with...
$49.50
  In Stock
Order now and your part arrives by May 26
Detergent Cup Door Spring – Part Number: WD3X764
Detergent Cup Door Spring
PartSelect #: PS263846
Manufacturer #: WD3X764
Enhance the performance of your dishwasher with this genuine GE Detergent Cup Door Spring. Specially designed, this Soap Cup Spring plays a crucial role in automatically opening the dispenser cover wh...
$49.50
  In Stock
Order now and your part arrives by May 26
Screw – Part Number: WD02X10126
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS958874
Manufacturer #: WD02X10126
This screw is sold individually. Size 10-16 x 5/8
$15.00
  In Stock
Order now and your part arrives by May 26
Screw – Part Number: WD02X10054
Screw
PartSelect #: PS258450
Manufacturer #: WD02X10054
This screw is sold individually. Size: 8-32 X5/16
$19.30
  Special Order
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
Dishwasher Hose Clamp Kit
★★★★★
★★★★★
(2)
PartSelect #: PS270806
Manufacturer #: WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in ...
$26.40
  In Stock
Order now and your part arrives by May 26

Questions And Answers for GSD2201F01WH

Be the first to ask our experts a question about this model!

Common Symptoms of the GSD2201F01WH

[Viewing 10 of 10]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
D/W would not drain. Water standing in bottom.
It is a simple process to replace the drain solenoid on these dishwashers, having replaced several in the past few months.

After removing the front bottom panels, I removed the 2 screws holding the old solenoid, unplugged the wire harness, and then switched over the springs to the new solenoid. Assembly was installing 2 screws, and plugging in the wire harness.

I work on a 260 + unit property, as well as working for a property management company who rents single family homes.

PartSelect.com is an excellent source of parts, shipping in a quick manner, allowing the repairs to be completed in a timely manner. Thank you.
Parts Used:
Drain Solenoid Kit
  • Ed from Cornelius, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
65 of 71 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor was getting noisier every time we used the dishwasher. We knew it was just a matter of time before it totally quit.
The most difficult part was removing the dishwasher from below the counter. Once that was complete, I simply turned the washer onto it's front surface to access the pump easier. Simply disconnected the electrical connectors, loosened the three hose clamps holding the hoses to the pump. Lastly removed a stiff arm bracket holding the pump. Reversed the order to install the new one using a longer bracket provided with the new unit. Hooked up the electrical connections last and slid the washer back in place. The washer runs like new now and is not making noise. The replacement part was a perfect match.
Parts Used:
Motor and Pump Kit
  • Glenn from Clemmons, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
48 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher pump valve leaking at shaft
took dishwasher out- put on table to work on-removed wire brace- disconected drain outlet- disconnected top drive seal- removed wire clip connector- removed motor unit----------------
installed new motor/drain unit--used new longer wire brac used adapter to connect electical leads-
tightened clamps and bingo it worked and didnt' leak. good job on the supplying of all the necessary adapers.
Parts Used:
Motor and Pump Kit
  • richard from las vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
40 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!