GSB6629SE157 General Electric Dishwasher - Overview

Sections of the GSB6629SE157

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Lower Rack Wheel Kit - 8 Pack – Part Number: WD35X21038
Lower Rack Wheel Kit - 8 Pack
★★★★★
★★★★★
(157)
PartSelect #: PS11726733
Manufacturer #: WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishe...
$29.89
  In Stock
Order within the next 7 hrs and your part ships today!
RACK SLIDE END CAP – Part Number: WD12X10304
RACK SLIDE END CAP
★★★★★
★★★★★
(52)
PartSelect #: PS2370502
Manufacturer #: WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to...
$12.61
  In Stock
Order within the next 7 hrs and your part ships today!
Upper Roller and Axle - Kit of 4 – Part Number: WD12X10327
Upper Roller and Axle - Kit of 4
★★★★★
★★★★★
(83)
PartSelect #: PS3486910
Manufacturer #: WD12X10327
The dishwasher roller assembly attaches to the upper dishrack. It allows the dishrack to slide out easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the doo...
$19.96
  In Stock
Order within the next 7 hrs and your part ships today!
Lower Front Dishrack Wheel – Part Number: WD12X271
Lower Front Dishrack Wheel
★★★★★
★★★★★
(10)
PartSelect #: PS259136
Manufacturer #: WD12X271
The lower dishrack wheel on your dishwasher allows the dishrack to roll in and out effectively. If your lower dishrack wheels are damaged, or the rack does not roll in and out, you may need to replace...
$16.40
  In Stock
Order within the next 7 hrs and your part ships today!
Corner Tub Baffle - Lower Right – Part Number: WD8X227
Corner Tub Baffle - Lower Right
★★★★★
★★★★★
(12)
PartSelect #: PS263963
Manufacturer #: WD8X227
This baffle fits the lower right hand corner of some dishwashers. It is black rubber and has a matching left hand lower corner baffle. It is recommended that you replace and install both left and righ...
$25.90
  In Stock
Order within the next 7 hrs and your part ships today!
Corner Tub Baffle - Lower Left – Part Number: WD8X228
Corner Tub Baffle - Lower Left
★★★★★
★★★★★
(19)
PartSelect #: PS263964
Manufacturer #: WD8X228
The corner tub baffle may also be known as the door baffle and is a part used on your dishwasher. The left and right side baffle on your dishwasher should be installed and replaced at the same time. T...
$23.85
  In Stock
Order within the next 7 hrs and your part ships today!
Silverware Basket (Grey) – Part Number: WD28X265
Silverware Basket (Grey)
★★★★★
★★★★★
(29)
PartSelect #: PS261346
Manufacturer #: WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you sh...
$90.95
  In Stock
Order within the next 7 hrs and your part ships today!
LOWER RACK – Part Number: WD28X31819
LOWER RACK
★★★★★
★★★★★
(70)
PartSelect #: PS17137102
Manufacturer #: WD28X31819
This part includes the wheels.
$192.42
  On Order
Door Cable and Eyelet – Part Number: WD7X14
Door Cable and Eyelet
★★★★★
★★★★★
(14)
PartSelect #: PS263918
Manufacturer #: WD7X14
This part is sold individually. It is recommended that both sides are changed when replacing one.
$25.94
  In Stock
Order within the next 7 hrs and your part ships today!
Piston and Nut Assembly – Part Number: WD24X10018
Piston and Nut Assembly
★★★★★
★★★★★
(19)
PartSelect #: PS260690
Manufacturer #: WD24X10018
This is used for the check valve.
$24.32
  In Stock
Order within the next 7 hrs and your part ships today!
Gasket Insert – Part Number: WD08X10015
Gasket Insert
★★★★★
★★★★★
(15)
PartSelect #: PS258653
Manufacturer #: WD08X10015
The gasket insert is connected to the gasket in the bottom of your dishwasher door. It is a small piece of white plastic that measures approximately 4 inches by 1 inch, and is sold individually. The g...
$21.10
  In Stock
Order within the next 7 hrs and your part ships today!
Drain Valve Shaft Seal – Part Number: WD8X181
Drain Valve Shaft Seal
★★★★★
★★★★★
(11)
PartSelect #: PS263930
Manufacturer #: WD8X181
The drain valve shaft seal is a part for your dishwasher drain pump valve. This seal creates a watertight closure around the flapper valve shaft. This part can be accessed through the access panel at ...
$36.02
  In Stock
Order within the next 7 hrs and your part ships today!

Questions And Answers for GSB6629SE157

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the GSB6629SE157

[Viewing 11 of 11]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The rollers on the upper rack broke
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece then slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the
guides.
Parts Used:
Upper Roller and Axle - Kit of 4
  • Carl from Fairfield, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
544 of 571 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack wheel was melted
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • Mark from Huntingdon Valley, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
520 of 542 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel broken off bottom rack
Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done!
Parts Used:
Lower Front Dishrack Wheel
  • Julie from Maumee, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
500 of 514 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!