GHWS3605F0MC General Electric Washer - Overview
Sections of the GHWS3605F0MC
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Screw 8-16 hxw 1/2 Stainless Steel
PartSelect #: PS258461
Manufacturer #: WD02X10067
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
$15.68
In Stock
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$15.68
In Stock
Washer Damper Assembly
PartSelect #: PS8756975
Manufacturer #: WH01X10727
This is a replacement shock absorber for your washer. The shock absorber is approximately 9 inches long and a little more than one inch wide. It is black and silver in color, and is sold individually....
$37.39
In Stock
Screw
PartSelect #: PS283515
Manufacturer #: WR01X10065
Size: 10-32 GXTT FLP .595
Sold individually.
$15.68
In Stock
Screw
PartSelect #: PS234226
Manufacturer #: WB1K5157
This screw is black in color and sold individually.
$14.65
In Stock
Screw - 10-18 Hi/Lo hxw 1/2
PartSelect #: PS1483095
Manufacturer #: WR01X10619
Sold individually.
$14.65
In Stock
Control Knob - Chrome
PartSelect #: PS8756983
Manufacturer #: WH01X10748
Enhance the functionality of your dryer with this highly durable Control Knob from GE. This chrome control knob, an integral part of the dryer, allows for the precise and easy adjustment of cycle sett...
$36.00
In Stock
RING BALANCE Assembly
PartSelect #: PS8757351
Manufacturer #: WH45X10138
This washer balance ring assembly helps stabilize the wash basket during the spin cycle to reduce excessive vibration, noise, and shaking. By counterbalancing uneven loads, it supports smoother operat...
$148.91
In Stock
Questions And Answers for GHWS3605F0MC
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GHWS3605F0MC
[Viewing 4 of 4]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drain pump failed
Remove back cover and with a light and a mirror the screws can be identified. Three hold this pump on. Remove electrical connection then the pump. So also remove the corrugated connecting boot by undoing three clamps. Clean and reassemble
Parts Used:
-
John from LYONS, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Riper gasket main, needed replaced.
After trying multiple times, multiple ways to stretch the gasket over the washer drum with no luck, I was able to get it installed but it took 2 more people. 4 hands to hold the gasket while the other person fits it around the drum. I noticed in the install videos they start the process then cut away, and magically the gasket is installed
... Read more
.
Read less
Parts Used:
-
Michael from WELDON, IL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front load clothes washer drum shaft seal and bearing failed causing extreme bearing noise
Looked up on YouTube repair procedures and found enough to point me in the right direction. I am experienced in auto and appliance repairs and felt this would be easy even without YT but it helped me prepare tool list as I live 2K miles away from the family. Though YT was not exact machine, it was close enough to get me started as it wa
... Read more
sn't rocket science. Once the machine was disassembled and bearings/gasket removed, I found a local bearing supplier which matched parts and started re-assembly. Total machine work time was approximately 7 hours and it runs like new!
A couple of tricks found on YT was putting bearings in freezer prior to assembly for potentially "shrinking" to ease installation, red lock-tite, and using a "good" liquid wrench lubricant for removing the inner rusted bearing.
It's not rocket science and I saved repair technician cost or purchasing a new $1100 washer. My costs were $113, and joy of a successful fix! What did we have to lose!!
A couple of tricks found on YT was putting bearings in freezer prior to assembly for potentially "shrinking" to ease installation, red lock-tite, and using a "good" liquid wrench lubricant for removing the inner rusted bearing.
It's not rocket science and I saved repair technician cost or purchasing a new $1100 washer. My costs were $113, and joy of a successful fix! What did we have to lose!!
Read less
Parts Used:
-
Dan from GOLDEN VALLEY, MN
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!