EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
βœ–
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > GFW400SCK0WW > Symptoms > Leaking

Parts That Fix General Electric Washer GFW400SCK0WW Leaking

Leaking is a commonly reported symptom for the GFW400SCK0WW General Electric Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your GFW400SCK0WW General Electric Washer that will fix Leaking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Leaking is a commonly reported symptom for the GFW400SCK0WW General Electric Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your GFW400SCK0WW General Electric Washer that will fix Leaking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 30% of time

$ 36.85
  In Stock
PartSelect Number PS1016305
Manufacturer Part Number WH01X10279
Fixes Symptom 19% of time

This is the replacement water valve for your washer. It has 2 inlets and 3 outlets. The water valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washer continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your dishwasher. This part is sold individually and is an OEM part sourced directly from the manufacturer.

$ 130.98
  In Stock
PartSelect Number PS1482392
Manufacturer Part Number WH13X10029

Replacing your General Electric Washer Water Valve with 2 Inlets and 3 Outlets

Replacing your Water Valve with 2 Inlets and 3 Outlets

Customer Repair Stories

stops at rise
removed 5 screws, unscrew two more screws, remove the houses and disconnect the wires remove the watter valve.
  • Felipe from Houston, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
12 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer stop and blinks in the RINSE MODE
I called a repair person to check my 15 months old GE front loader washer that stopped in rinse mode. After his inspection he said it was a deffected computer board and it would be very expensive to replace the 3 computers boards inside and it would be cheaper to buy a new top loader washer. The next day I lifted the top cover and found a taped plastic envelope with instructions titled β€œFor service Technicians Only." On page 2, instruction on to how to enter the washer in to service mode and to test the washer:
Press : Signal, Delay, Signal, Delay (within 30 seconds of plug in washer)
Then rotate main knob to #102 and press Start:(the washer did a test for finding the problem) , and for me was : E22 , it means : replace solenoid valve assembly.
So I order the part from Partselect.com for $58.00 and my Washer runs beautiful, thanks to the instructions inside.
  • Miguel from Jacksonville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
57 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 16% of time

$ 41.74
  In Stock
PartSelect Number PS1019932
Manufacturer Part Number WH01X10277

Replacing your General Electric Washer Washer Gasket Inside Clamp

Replacing your Washer Gasket Inside Clamp
Fixes Symptom 15% of time

This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub.

$ 270.31
  In Stock
PartSelect Number PS6011699
Manufacturer Part Number WH08X10064
Fixes Symptom 13% of time

Enhance the functionality of your GE appliance with this high-quality inside drain hose. This integral component plays a vital role in facilitating the efficient draining of your appliance. Expertly designed by GE, it optimizes performance and longevity, ensuring your appliance remains in top-tier working condition. With this robust inside drain hose, you will get optimal use out of your appliance while experiencing the trademark durability and reliability that GE products offer. Made for precise fit and easy installation, this product offers the perfect solution for maintaining your GE appliance. Choose GE for the best in appliance repair parts.

  No Longer Available
PartSelect Number PS1022525
Manufacturer Part Number WH41X10127
Fixes Symptom 7% of time

$ 19.30
  Special Order
PartSelect Number PS1017683
Manufacturer Part Number WH01X10266