Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
GFE28GYNGFS General Electric Refrigerator - Overview
Save your modelModel Saved!
Save your model for later to make things easier.
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This NSF-certified water filter helps to improve the taste, quality, and health of your water by removing a number of contaminants including mercury, lead, and trace pharmaceuticals. The filter should...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
This door shelf bin is an authentic OEM part sourced directly from the manufacturer. It is designed for use in your GE refrigerator. It is made of white and clear plastic, and houses items on your ref...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
This OEM part is from GE and is designed for use in your refrigerator. This part is known as a door mounting screw, and is for mounting the handles of the refrigerator to the door studs.
This replacement vegetable pan glass is designed to restore the functionality and appearance of your refrigerator’s crisper drawer. It provides a sturdy, transparent surface for storing produce while ...
This is a door gasket for the freezer compartment of your refrigerator. Door gaskets are made of rubber and plastic and are designed to seal the cold interior of the freezer compartment from the ambie...
Need a reliable solution to improve your appliance's airflow? Meet the GE Dark Dorian Vent Grille. This part is more than just a vent grille; it's your key to getting your appliance running at peak pe...
Improve the functionality of your refrigerator with this robust, GE Latch Icebox Door. Specifically designed for GE refrigerators, this essential component ensures secure closure and efficient perform...
This is a water filter bypass plug for various refrigerators. This part is used to bypass a missing water filter in your fridge, so you can continue to dispense water and ice from it. If your current ...
$57.38
In Stock
Order now and your part arrives by May 26
Questions And Answers for GFE28GYNGFS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
October 23, 2024
Can not get water to ice maker to make ice. Ice cube dispenser works fine.
For model number GFE28GYNGFS
Hi Joe,
Thank you for your question. If the ice maker is not making ice, because water is not reaching it, check the water inlet valve. First check for signs of leaks, or loose connectors in the valve inlet supply. If no issues are found, inspect the valve body for any cracks or damage. Inspect the outlet tubing for any brittle tubing, abrasions, cracks, or any other damage. If you do not locate any leaks, disconnect the water inlet valve and remove it from the refrigerator to test it. Set your multimeter to the Rx1 setting and touch the terminals with the probes. You are testing for continuity and should receive a reading of 200 to 500 ohms. If you receive any other reading, you will need a replacement water inlet valve. If the water inlet valve is fine, you will need to check the water fill tubes, the water filter and the ice maker. We hope this helps!
On Oct 23/2024 I ask why I can't get water to the ice maker. Your reply was to check for leaks and connections in the inlet valve. Found no problems. Also check with ohm meter for readings between 200 to 500. Could not remove valve from unit as could not get wiring connecter apart. Put probes on the single inlet valve blades and reading was 394 . Valve was not a double valve. It was where my filtered water was to be attached to the frig. Was not able to find any more valves. What now? Thanks
For model number GFE28GYNGFS
Hello Joe, Thank you for your inquiry. One water inlet valve, the single one for the water dispenser is at the back of the refrigerator, the other one for the ice maker part# PS6011774 is behind a cover in the ice box where the ice bucket is located. There is a latch on the backside of the door. Remove the two small upper shelves, open the latch and pull the access door open. We have also included a link to our video on testing both the ice maker and water inlet valve as there still could be a solenoid or gear inside the ice maker that is sticking. We hope this helps.
Did this question help you?
Thank you for voting!
Matthew
November 12, 2024
The freezer on this unit is working fine, but the fridge won't go below 45 degrees even though we have it set to 34 and usually have the turbo cool option running. The fan wasn't blowing that hard, so I replaced it as well as the temp sensor in the cooling tower. I still have the same problem. I am thinking that it is likely the control board now. Is there something else that could be causing this issue?
For model number GFE28GYNGFS
Hello Matthew, Thank you for contacting us. If you have already replaced the temperature sensor and the refrigerator evaporator fan, then we would recommend checking the control board. We hope this helps you.
why after installing a new compacitor and components the compressor still come on and goes all
For model number GFE28GYNGFS
Hello Thomas, thank you for contacting us. If your refrigerator compressor briefly hums, turns on, and then immediately shuts down even after you have already replaced the start capacitor and relay components, we would suggest checking the compressor. The internal mechanical pistons or bearings inside the compressor pump may be physically locked up or seized. Replacing the compressor, part number PS11721961, might help fix the issue. Good luck with this repair!
Simple repair, rolled refrigerator out, disconnected power, removed 4 screws holding door board, disconnected wire harness, replaced board on bench, returned to refrigerator, plugged in wire harnessing, replaced screws, plugged in, waited about 5 min. Tried door water dispense and it worked. Took a while for ice make to get up to speed, b
... Read moreut it also works great. After have a tech come out to look at, and he said it was freezing inside the door and needed a new door for right at $1,000.00, and nothing seem to indicate that as the problem. We took it on ourselves to try Partselect, ordered several extra parts, but only used the door board, returns went easy and i was refunded my money before I even sent the parts back. Great Service
Took out the old parts and replaced it with the new parts. The new OVERLOAD PTCR COMBO was different then the one that we replaced so we called customer service and they told us which wire to insert into each of the 2 slots and it is working like new again. Outstanding and knowledgeable customer service.
I opened the back panel of the fridge and exposed the compressor. Unplugged existing run capacitor and installed new one with the addition of the sleeve that is stated must be installed around the run capacitor. Everything I read and on this web site says that based on these symptoms, that the problem is the run capacitor. I search
... Read moreed and search for a part called a start relay which plugs in to the compressor. This run capacitor plugs in to this other part which I take as the start relay.
Installing this run capacitor did not solve the problem. The fridge compressor keeps cycling on and off. Freezer doesn't keep as cold as it should.
