This sensor (Temperature Sensor, Thermistor, Refrigerator Temperature Sensor) sends the temperature reading of the compartment to the control board. If you notice your refrigerator is too warm, too co...
$27.05
In Stock
Order within the next 11 hrs and your part ships today!
This evaporator fan motor circulates air to the fresh food compartments for efficient cooling. It powers the evaporator fan that draws air from the refrigerator and circulates it over the evaporator c...
$132.28
In Stock
Order within the next 11 hrs and your part ships today!
This compression ring is meant to hold the evaporator fan motor in place in the freezer compartment of your refrigerator. This is is a genuine OEM part. The tools needed to complete this repair are a ...
$9.90
In Stock
Order within the next 11 hrs and your part ships today!
This part is the replacement door handle fastener for your refrigerator. It is made of white plastic and metal, is sold individually, and measures approximately 1-1/4 inches by 1 inch. The door handle...
$16.28
In Stock
Order within the next 11 hrs and your part ships today!
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
$108.60
In Stock
Order within the next 11 hrs and your part ships today!
This water filter is found in the rear upper-right corner of the interior of the refrigerator. If your model has a replacement indicator light it will turn red to signal the need for a replacement. If...
$89.06
In Stock
Order within the next 11 hrs and your part ships today!
This door shelf bin is a genuine OEM replacement part designed for refrigerators. It is made of highly durable clear plastic, which allows users to easily view the contents of the bin. The bin is a st...
$49.31
In Stock
Order within the next 11 hrs and your part ships today!
This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.
$26.94
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for GFE26JEMAFDS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Migsey
June 15, 2021
Why my refrigerator have a label saying cancer and reproductive harm
For model number GFE26JEMAFDS
Hello Migsey, Thank you for the question. The Proposition 65 warning labels are a warning that a product contains chemicals that may cause cancer, birth defects, or reproductive harm are now required on many household items sold in California. But people all over the country might see them because many companies put the labels on all items that contain these chemicals, even if they’re going to be sold in other states. The warning labels can be found on many kinds of products, such as electrical wires, jewelry, padlocks, dishes, flashlights, and pesticides, ect. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance unit. We hope this helps.
Was this helpful?
Thank you for voting!
Lisa
September 27, 2023
I need the water bypass. We have an RO filtration system. What part number am I looking at?
For model number GFE26JEMAFDS
Hi Lisa, thank you for reaching out. The water filter bypass plug for your model is part number PS16217315. We hope this sorts out your problem!
the cold water dispenser bearly comes out when activated!
For model number GFE26JEMAFDS
Hi Lucian, thank you for reaching out. The temperature in your freezer should be maintained between 0 to 10 degrees Fahrenheit. If your freezer is set too cold, your water line may be frozen as well. If this is not the issue, we would suggest you checking the cold water tank assembly, part number PS11736997. Glad to be of help!
Compressor comes on for 10 or 15 seconds then hear a click then goes off for about 5 or 10 minutes . Does this while plugged in . Will not freeze . All fans running ok . Temp inside not cold enough in frige and will not freeze . Any thoughts . Thanks , Tony
For model number GFE26JEMAFDS
Hello Tony, thank you for the question. This means the relay that starts the compressor is faulty and will need to be replaced. Start relay & overload for your model is part number PS11767843. Good luck with the repair!
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
... Read more />After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
I had to remove all of the shelves.....part of the ice maker.....the rear cover over the freezer coils.....There were two wires that came from the back of the freezer that were also incorporated with the fan motor plug from the factory....This caused me to cut all of the wires from the new motor and soider them to the existing plug and sh
... Read morerink wrap the connections. If GE would have supplied two new ends I could have cut only those wires added the ends and inserted them into the new motor plug thus eliminating an extra hour and a soildering iron,,,,In my case not a big deal however not a project for those who have trouble with repairs using these type of tools.