Models
>
GDWT260R10SS
GDWT260R10SS General Electric Dishwasher - Overview
Sections of the GDWT260R10SS
[Viewing 5 of 5]
Manuals & Care Guides for GDWT260R10SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
Dishrack Rollers and Axles - Kit of 8
PartSelect #: PS11725221
Manufacturer #: WD35X21041
If you are having trouble rolling your dish rack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Replace the parts ...
$32.18
In Stock
Silverware Basket
PartSelect #: PS959351
Manufacturer #: WD28X10128
This is a basket for washing flatware or silverware in your dishwasher.
$32.35
In Stock
Upper Rack End Cap
PartSelect #: PS958986
Manufacturer #: WD12X10184
This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from fall...
$8.06
In Stock
Detergent Dispenser with Rinse Cap
PartSelect #: PS958966
Manufacturer #: WD12X10163
This detergent dispenser assembly is attached to the inner door panel of a dishwasher. This part holds detergent and dishwasher rinse products in a covered container. If your dispenser will not open, ...
$84.00
In Stock
Water Inlet Valve
PartSelect #: PS3654179
Manufacturer #: WD15X10014
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
$43.82
In Stock
Upper Rack Wheel
PartSelect #: PS11721507
Manufacturer #: WD35X21036
Comes with the axles.
$55.42
In Stock
Tub Gasket
PartSelect #: PS958888
Manufacturer #: WD08X10032
This gasket lines the inside cabinet in the dishwasher.
$40.45
In Stock
Rinse Aid Cap
PartSelect #: PS958932
Manufacturer #: WD12X10122
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
$16.44
In Stock
Hinge Arm Link
PartSelect #: PS259336
Manufacturer #: WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$8.54
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
PartSelect #: PS258461
Manufacturer #: WD02X10067
Sold Individually.
$8.54
In Stock
Cage Roller Bearing Assembly
PartSelect #: PS959485
Manufacturer #: WD30X10020
Aides with movement or sliding of the dishrack.
$35.93
In Stock
Sump
PartSelect #: PS959014
Manufacturer #: WD18X10026
This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.
$37.62
In Stock
Questions And Answers for GDWT260R10SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
January 16, 2024
Just need to know the dimensions of the model...for replacement
For model number GDWT260R10SS
Hello Thomas, Thank you for your inquiry. As per GE, we show the measurements as 34 inches high by 24 inches wide by 24 3/4 inches deep. We hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the GDWT260R10SS
[Viewing 11 of 11]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower wheel axles worn out
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!!
Parts Used:
-
Glen from Alpine, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
966 of 986 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Parts Used:
-
Michelle from Weddington, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
752 of 762 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels kept falling off the right side of the bottom rack; it was extremely annoying. We basically had to lift the bottom rack to get it in and out of the dishwasher.
I removed the old wheels & studs on the right side of the bottom rack of the dishwasher, and I gleefully THREW THEM ALL OUT! HA HA!
Then I put the nice new rollers on the studs, and then I put them on the rack.
Helpful hints for others beleaguered by this design problem:
1) Be sure to get new studs - ... Read more that's the part that kept causing the wheels to fall off
2) Put the rollers on the studs before putting them on the rack. (Another user on this site noted that, and it was very helpful).
3) P.S. Very prompt shipping, great service - I will definitely use this company again. And thanks to whoever dropped a cheerful Christmas candy into the box!!
Then I put the nice new rollers on the studs, and then I put them on the rack.
Helpful hints for others beleaguered by this design problem:
1) Be sure to get new studs - ... Read more that's the part that kept causing the wheels to fall off
2) Put the rollers on the studs before putting them on the rack. (Another user on this site noted that, and it was very helpful).
3) P.S. Very prompt shipping, great service - I will definitely use this company again. And thanks to whoever dropped a cheerful Christmas candy into the box!!
Read less
Parts Used:
-
Jean from Richmond, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
456 of 663 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!