GDWT166V00SS General Electric Dishwasher - Overview
Sections of the GDWT166V00SS
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Dishrack Rollers and Axles - Kit of 8
PartSelect #: PS11725221
Manufacturer #: WD35X21041
If you are having trouble rolling your dish rack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Replace the parts ...
$52.98
In Stock
Dishwasher Basket Assembly Silverware
PartSelect #: PS12703061
Manufacturer #: WD28X24469
This basket is part of a silverware basket that has 3 sections. This is the middle section of the basket.
$42.78
In Stock
Silverware Basket
PartSelect #: PS959351
Manufacturer #: WD28X10128
This is a basket for washing flatware or silverware in your dishwasher.
$45.06
In Stock
Complete Lower Service Rack Assembly
PartSelect #: PS12749241
Manufacturer #: WD28X25960
This complete lower rack assembly is a genuine replacement part designed for select GE dishwashers, including models sold under Hotpoint, Haier, Monogram, and Café brands. Engineered to securely hold ...
$160.61
In Stock
Water Inlet Valve
PartSelect #: PS3654179
Manufacturer #: WD15X10014
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
$44.23
In Stock
Detergent Dispenser with Rinse Cap
PartSelect #: PS958966
Manufacturer #: WD12X10163
This detergent dispenser assembly is attached to the inner door panel of a dishwasher. This part holds detergent and dishwasher rinse products in a covered container. If your dispenser will not open, ...
$79.64
In Stock
Tub Gasket
PartSelect #: PS958888
Manufacturer #: WD08X10032
This gasket lines the inside cabinet in the dishwasher.
$58.04
In Stock
Hinge Arm Link
PartSelect #: PS259336
Manufacturer #: WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$16.05
In Stock
Rinse Aid Cap
PartSelect #: PS958932
Manufacturer #: WD12X10122
This genuine rinse-aid dispenser cap is an original replacement part from GE, designed for use with GE dishwashers. It covers the rinse agent port and securely seals the dispenser to keep the rinse ai...
$19.08
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
PartSelect #: PS258461
Manufacturer #: WD02X10067
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
$16.05
In Stock
Sump
PartSelect #: PS959014
Manufacturer #: WD18X10026
This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.
$49.58
In Stock
ARM SPRAY UPPER Assembly
PartSelect #: PS3511316
Manufacturer #: WD22X10084
The upper spray arm helps distribute water from the top of the dishwasher tub.
No Longer Available
Manuals & Care Guides for GDWT166V00SS
Click to downloadInstall
Installation Instructions
(3.07MB)
Manual
Owner's Manuals
(2.60MB)
Manual
Owner's Manuals
(3.51MB)
Questions And Answers for GDWT166V00SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jean
January 24, 2024
Does this model have a filter that has to be removed and cleaned with a soft toothbrush
For model number GDWT166V00SS
Hi Jean, thank you for your question! We have found that your model comes with a fine filter, part number PS958919. You may need to remove and clean it. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Fine Filter
$48.45
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the GDWT166V00SS
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower wheel axles worn out
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!!
Parts Used:
-
Glen from Alpine, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
966 of 988 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Parts Used:
-
Michelle from Weddington, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
752 of 762 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels kept falling off the right side of the bottom rack; it was extremely annoying. We basically had to lift the bottom rack to get it in and out of the dishwasher.
I removed the old wheels & studs on the right side of the bottom rack of the dishwasher, and I gleefully THREW THEM ALL OUT! HA HA!
Then I put the nice new rollers on the studs, and then I put them on the rack.
Helpful hints for others beleaguered by this design problem:
1) Be sure to get new studs - ... Read more that's the part that kept causing the wheels to fall off
2) Put the rollers on the studs before putting them on the rack. (Another user on this site noted that, and it was very helpful).
3) P.S. Very prompt shipping, great service - I will definitely use this company again. And thanks to whoever dropped a cheerful Christmas candy into the box!!
Then I put the nice new rollers on the studs, and then I put them on the rack.
Helpful hints for others beleaguered by this design problem:
1) Be sure to get new studs - ... Read more that's the part that kept causing the wheels to fall off
2) Put the rollers on the studs before putting them on the rack. (Another user on this site noted that, and it was very helpful).
3) P.S. Very prompt shipping, great service - I will definitely use this company again. And thanks to whoever dropped a cheerful Christmas candy into the box!!
Read less
Parts Used:
-
Jean from Richmond, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
459 of 666 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!