Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FV15AAB

FV15AAB Hotpoint Freezer - Overview

Get Parts and Repair Help for FV15AAB

If you know the freezer repair part you need, you can browse the list of all parts on the FV15AAB, or you can search by name or part description. You can also find your part by where it is located on the FV15AAB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FV15AAB

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.21

Power Cord

This heavy-duty cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to your refrigerator, allowing it to keep the contents inside cool. There c...

$3.60

CABLE CLAMP

$6.80

Tubular Fastener

Thermostat Control Kit

$5.08

LEVELNG JACK

$85.44

HANDLE CHROME

GASKET S LID

$71.49

DRIER

$33.63

INSULATOR

MACHINE HIGH SIDE(-B)

Common Symptoms of the FV15AAB

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Two of the two leveling jacks of this old refrigerator were missing and had to be replaced.

  • Customer: Bruce K from RESTON, VA
  • Difficulty: Very Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I ordered four leveling jacks from this site for the refrigerator using a slightly different model number (my model was not listed). I assumed that the jacks all had the same shaft diameter and thread size. However, it turned out that the two front jacks had half-inch shaft diameters. It could be that originally there were rollers in front. The two rear jac... read more

the biggest problem was with removing the old capillary tube I had to push the new one through the rubber grommet and I think it,s working now!!!

  • Customer: CURTIS from SPICER, MN
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I replaced the thermostat. read more