The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner...
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ann
June 30, 2021
The clear finish is coming off of the knobs on my stainless cooktop. Is this a common occurrence with this model! Is there a solution? I have the serial number for this cooktop and believe it was new when we moved into this home. I don’t know if it was registered for warranty or if the warranty is transferable.
Any information you could give me would be appreciated. Thank you
For model number FPGC3087MSB
Hello Ann, Thank you for contacting PartSelect.com. For the Warranty you will need to contact Frigidaire. Once the finish is wearing off the knobs would need to be replaced. We hope this helps!
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read moreer and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.