FH500V (AS14) Kawasaki Engine - Overview

Push Rod This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of t... Add to cart

Oil Seal

★★★★★

★★★★★

(1)

This genuine oil seal is a brown, rubber part, measuring 8 x 14 x 5mm. This part can be installed using a screwdriver, wrench set, pliers, and pick, and a seal puller may also be required for maintena... Add to cart

Engine Ignition Coil

★★★★★

★★★★★

(2)

This genuine ignition coil assembly—also known as an armature-magneto—is a direct replacement part sourced from the original equipment manufacturer for use with Kawasaki engines. It plays a critical r... Add to cart

Fuel Filter This OEM Fuel Filter is a white, individually sold, plastic part, which measures 3 x 1.25 inches. It can be installed using pliers and is rated as Easy to install by customers (Tip: Make sure the fuel... Add to cart

Hook-hook & Joint Set

★★★★★

★★★★★

(1)

This part is an OEM from the Kawasaki manufacturer. The plastic, hook-hook & joint set is compatible with many lawn and garden engines. This item is fitted onto the case-assy-air filter, and has been ... Add to cart

Muffler Gasket This muffler gasket is supplied directly from original equipment manufacturer. It is commonly used with Kawasaki engines. Its designed to create an air tight seal between the muffler and the pipe. Ove... Add to cart

Gasket-crankcase Cover This item has been sourced from the original manufacturer to be used with small engines from Kawasaki. The gasket is used to seal the connection between the crankcase and the crankcase cover. It is re... Add to cart

Collet This is half of a collet. You will need to order two to receive a whole collet. Add to cart

Element-air Filter This is an authentic OEM approved replacement filter element generally used on Kawasaki small engines. It is designed to filter out dust and dirt from contaminating engine. This is a pleated paper fil... Add to cart

Insulator Gasket This part has been sourced from the original manufacturer and is intended to be used with four-stroke engines from Kawasaki. This gasket is used to provide spacing and to seal the connection between t... Add to cart

Nut This Nut is a black, metal, individually sold part. Certified by the original equipment manufacturer, it can be installed with a wrench or socket and torque wrench by torquing to the manufacturer spec... Add to cart

Element-air Filter This replacement air filter element is specially manufactured for Kawasaki engines. It is an authentic OEM part, not an aftermarket alternative. This filter will helps to remove dust and other contami... Add to cart