Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEC36S6EBB

FEC36S6EBB Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC36S6EBB

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC36S6EBB, or you can search by name or part description. You can also find your part by where it is located on the FEC36S6EBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Burner Knob

Sold individually. This knob accepts a D-shaped shaft.


Surface Burner Switch - 8"

This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.


6" Radiant Element with Limiter - 1200W

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top o...


Radiant Surface Element

This part is the heatsource.


Surface Burner Switch - 6"

This switch controls the stove top surface burner.




Surface Burner Switch - 6" Warmer


Retainer Bracket





Common Symptoms of the FEC36S6EBB

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

right front element burned out

  • Customer: Larry from Wenatchee, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 39 of 45 people found this instruction helpful
FIRST I UNPLUGGED THE GLASS TOP RANGE. While locating the part on the PartSelect diagram I was also able to determine how to access the burned out element. It was very simply to remove three phillips head screws in the front top( above the oven)area of the range, slide the topof the range forwardand lift it up, remove one screw holding the metal bar under th... read more

burner would not heat

  • Customer: Ed from Winthrop, MA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 18 of 20 people found this instruction helpful
killed the 50 amp power. removed 3 screws from above oven door slid out cook top, dropped brace holding 2 front burners. The connector corroded off had to look for a high heat connector to connect to the element, after that just screwed everything back together. read more

Burner failed due to poor manufacturing quality

  • Customer: LaVern from Cedar Falls, IA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 12 of 16 people found this instruction helpful
Disconnected power. Removed hold down fasteners for stove top. Fortunately, I did not flue down or use the double back tape to secure stovetop to counter. If this adhesive were used, it is possible I would have had great difficulty in removing range. I did not disconnect the wiring, but turned the range top over to access the cover. I removed the cover... read more