Models > FE710DRS

FE710DRS (XAA-0001) Samsung Range - Overview

Sections of the FE710DRS

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Micro Door Switch – Part Number: 3405-001034
Micro Door Switch
★★★★★
★★★★★
(8)
PartSelect #: PS4131192
Manufacturer #: 3405-001034
$17.04
  In Stock
Order within the next 17 mins and your part ships today!
Range Oven Temperature Sensor – Part Number: DG32-00002B
Range Oven Temperature Sensor
★★★★★
★★★★★
(5)
PartSelect #: PS4240743
Manufacturer #: DG32-00002B
$86.21
  In Stock
Order within the next 17 mins and your part ships today!
Dual Element Switch – Part Number: DG44-01002A
Dual Element Switch
★★★★★
★★★★★
(10)
PartSelect #: PS4240803
Manufacturer #: DG44-01002A
$113.54
  In Stock
Order within the next 17 mins and your part ships today!
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
Sold individually.
$6.57
  In Stock
Order within the next 17 mins and your part ships today!
THERMOSTAT;-,NT-101,250V – Part Number: DE47-20037A
THERMOSTAT;-,NT-101,250V
★★★★★
★★★★★
(4)
PartSelect #: PS4226434
Manufacturer #: DE47-20037A
$19.79
  In Stock
Order within the next 17 mins and your part ships today!
Convection Fan Motor – Part Number: DG31-00005A
Convection Fan Motor
★★★★★
★★★★★
(6)
PartSelect #: PS4240735
Manufacturer #: DG31-00005A
The fan motor helps rotate the upper fan blade to circulate the hot air though the oven cavity for even heating. This motor is reverse threaded.
$106.15
  In Stock
Order within the next 17 mins and your part ships today!
HEATER-BROIL;FE710DRS,IN – Part Number: DG47-00045A
HEATER-BROIL;FE710DRS,IN
★★★★★
★★★★★
(1)
PartSelect #: PS4240842
Manufacturer #: DG47-00045A
$177.14
  In Stock
Order within the next 17 mins and your part ships today!
Oven Temperature Sensor – Part Number: DG32-00004C
Oven Temperature Sensor
PartSelect #: PS4240744
Manufacturer #: DG32-00004C
$127.95
  In Stock
Order within the next 17 mins and your part ships today!
Convection Reverse Fan Motor - 120V 60Hz – Part Number: DG96-00110B
Convection Reverse Fan Motor - 120V 60Hz
★★★★★
★★★★★
(2)
PartSelect #: PS4241514
Manufacturer #: DG96-00110B
$136.47
  In Stock
Order within the next 17 mins and your part ships today!
HEATER-RADIANT DUAL;FTQ* – Part Number: DG47-00043B
HEATER-RADIANT DUAL;FTQ*
★★★★★
★★★★★
(1)
PartSelect #: PS4240841
Manufacturer #: DG47-00043B
$197.31
  In Stock
Order within the next 17 mins and your part ships today!
Upper Fan Blade – Part Number: DG67-00001B
Upper Fan Blade
PartSelect #: PS4241119
Manufacturer #: DG67-00001B
$9.67
  In Stock
Order within the next 17 mins and your part ships today!
HEATER-RADIANT TRIPLE;FT – Part Number: DG47-00021B
HEATER-RADIANT TRIPLE;FT
★★★★★
★★★★★
(1)
PartSelect #: PS4240826
Manufacturer #: DG47-00021B
$261.37
  In Stock
Order within the next 17 mins and your part ships today!

Questions And Answers for FE710DRS

Be the first to ask our experts a question about this model!

Common Symptoms of the FE710DRS

[Viewing 4 of 4]
Doesn’t shut off
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
No heat
Fixed by
these parts
Show All
Won’t turn on
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven shut off during self clean cycle and door stayed locked.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Parts Used:
THERMOSTAT;-,NT-101,250V
  • Uwe from FORT COLLINS, CO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The microwave would not turn on or would run with the door open
Other tools that are usefull long needle nose pliers, long thin blade screw driver and small magnetic flashlight. Place the microwave on a work bench and remove the case it cover 3 sides. Place the microwave on a chair so it can stand with the controls up. You are replacing the lower door microswitch. The switch is located behind the control panel in the lower part of the area. The switch is several inches inside this area and your hands will not fit. Take care when moving wires and a couple of sensors. Use the thin blade screwdriver to release a tab holding the switch in place. Do not break this tab. Take the needle nose pliers and remove the switch. Put the wires on the new switch, open the door a short distance so a door lever moves enough to put the microswitch back into the bracket.
Parts Used:
Micro Door Switch
  • Raymond from TROY, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual burner only operates on high, no matter the setting
Followed video at the link below.

https://www.bing.com/videos/search?q=how+to+replace+infinity+switch+in+samsung+electric+range&docid=607999620772294704&mid=702E9DF006DF9B180DAA702E9DF006DF9B180DAA&view=detail&FORM=VIRE
Parts Used:
Dual Element Switch
  • Jeffrey from Hooksett, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!