FD26LKEC Frigidaire Grill - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
both burners had rusted thru on the gas grille
This was an easy replacement, but I thought I had ordered both burners as a set for close to $60. I was disappointed to see only one had arrived with the prompt delivery. I had to order another one and am waiting for its arrival. I had to pay shipping again which I am not too happy with. Be sure to order both burners in the future because the diagram shows one number for two identical burners which led me to believe they come in pairs. I don't think you would ever replace just one burner. I would think both burners would disintegrate roughly at the same time.
Parts Used:
-
Robert from Tampa, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor on bar-b-que was broken
1- removed two screws on each side of face plate to expose back side of ignitor.
2- went to garage to get cresent wrench and removed nut from old ignitor.
3- took out old ignitor and removed two wires.
4- put wires on new ignitor, placed ignitor in hole, and tightend nut on ignitor.
5- put face plate back and reinserted screws.
6- tested bar-b-que to ensure everything worked. It did!
2- went to garage to get cresent wrench and removed nut from old ignitor.
3- took out old ignitor and removed two wires.
4- put wires on new ignitor, placed ignitor in hole, and tightend nut on ignitor.
5- put face plate back and reinserted screws.
6- tested bar-b-que to ensure everything worked. It did!
Parts Used:
-
Lew from Lewiston, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!