FCFE306CAWB Electrolux Range - Overview
Sections of the FCFE306CAWB
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Radiant Element with Limiter - 1200W
PartSelect #: PS1528719
Manufacturer #: 318178110
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also kn...
$114.40
In Stock
ELEMENT
PartSelect #: PS16763418
Manufacturer #: 5304533520
Dual Radiant Surface Element
$72.00
In Stock
Terminal Block Kit
PartSelect #: PS2333392
Manufacturer #: 5303935271
This range terminal block kit provides a secure connection point between the household power cord and the appliance’s internal wiring. It helps distribute electrical power safely and reliably to the r...
$52.67
In Stock
Leveling Leg
PartSelect #: PS977569
Manufacturer #: 316272900
This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack o...
$23.60
In Stock
SWITCH - RADIANT DUAL
PartSelect #: PS17989560
Manufacturer #: 140173679014
This dual radiant infinite switch is a genuine OEM replacement designed to regulate heat settings for large surface elements on electric stoves. It controls power flow to a dual 9-inch/12-inch burner,...
$38.96
In Stock
HEATING ELEMENT,MIDDLE,TURBO
PartSelect #: PS18375114
Manufacturer #: 8583165300010
This radiant burner element delivers powerful, even heat for your cooktop, ensuring fast and efficient cooking. Measuring 9 inches and rated at 3200 watts, it is ideal for replacing a worn or malfunct...
$42.95
On Order
SWITCH
PartSelect #: PS8692370
Manufacturer #: 808136601
This Frigidaire Oven Door Light Switch is a genuine OEM part, compatible with certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan stoves, ovens, and ranges. Designed for functiona...
$46.34
In Stock
SWITCH
PartSelect #: PS16218333
Manufacturer #: 5304522966
This single infinite control switch regulates power to one surface burner on an electric range or cooktop, allowing you to adjust and maintain precise cooking temperatures. Unlike a basic on/off switc...
$60.51
In Stock
Questions And Answers for FCFE306CAWB
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the FCFE306CAWB
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ
... Read more
ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Read less
Parts Used:
-
Lori from Winter Haven, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
70 of 97 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center of dual burner was broken
Removed screws on the sides and front.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
Parts Used:
-
German from SELLERSBURG, IN
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 elements stopped working.
My husband followed the video instructions and it was easy to fix.
Parts Used:
-
Ruth from MORGANTOWN, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!