This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This lower spray arm assembly is a device in your dishwasher that distributes water and detergent during the washing cycle. Its rotating motion sprays water in multiple directions, ensuring thorough c...
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. R...
If your dishwasher is leaking or not draining properly, you may need to replace the drain hose. The drain hose connects to the pump located below the lower spray arm and aids in proper dishwasher drai...
This door spring is manufactured for a dishwasher door. The door spring applies tension to the dishwasher door so that the door does not drop too quickly when it is opening. If the door drops too quic...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete i...
This is a drain pump assembly for various compatible models of dishwashers, that is responsible for draining the water from the dishwasher after every cycle. This drain pump assembly is made of plasti...
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishw...
This water inlet valve is for dishwashers.
Water inlet valve supplies water to the dishwasher.
Unplug the dishwasher and shut off the water supply before installing this part
$48.27
In Stock
Questions And Answers for FBD2400KW10B
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nanette
October 28, 2023
My dishwasher has what appears to be a vent in the front of it. However, no steam ever comes out of it! There is a switch for Air Dry or Heat Dry. Either way, the dishes are always wet at the end of the cycle.
The heat element works just fine. Why are my dishes always wet?
I've read about ventless dishwashers. There is a hole near the bottom of the left wall, but it is in the wall, so I don't think it is intended to catch any condensation.
Also, as it does have what appears to be a vent on the outside, I feel it should vent. On the inside of the door (behind the vent) it looks like there could possibly be a way to pop out the plastic to allow steam to leave the dishwasher during the dry cycle, but I am afraid that it looks sealed and therefore don't want to try to push too hard on it. What do you think? Is there a way to get my dishwasher to dry my dishes?
For model number FBD2400KW10B
Hello Nanette, thank you for your inquiry. We have researched and found that the heat dry option provides faster drying since the heating element is on during the drying portion of the cycle, whereas the air dry option saves electricity as the heating element is off during the drying portion of the cycle. If your dishwasher is not drying dishes, we would recommend making sure that the liquid rinse aid dispenser is properly filled. If the issue remains, then you may need to check the high limit thermostat, part number PS16218719, to solve the problem. We hope this helps!
Dishwasher won't start. Breaker is good, checked all plugs in the door and underneath, appear to be seated properly. Recently had a latching issue and replaced the door catch but i'm pretty sure it's the latch because it still won't latch itself. Worked fine 12 hours prior. Anything i should check?
For model number FBD2400KW10B
Hello Nick,
Thank you for your question. Our sources agree that it would be the door latch under part PS12585636 for your model that would need to be replaced to fix the dishwashers issues. We hope this helps.
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
Over Thanksgiving, the spray arm in my dishwasher apparently popped off and was partially melted. I remounted it inside the dishwasher, but the new hole was on the side of the arm. I think this resulted in water being sprayed directly against the door and not up through the top holes. It flooded my kitchen floor.
The spray a
... Read morerm pops on and off with plastic tabs (?) at the base. You can lightly pry with a butter knife or simply wiggle it off. The new one popped right on. Easiest repair EVER.
