EWMED65HIW0 Electrolux Dryer Parts & Repair Help | PartSelect
You are logged in as a customer LOG OUT
Models > EWMED65HIW0

EWMED65HIW0 Electrolux Dryer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
PartSelect #:PS446428
Manufacturer #:3204267
This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will c...
In Stock
PartSelect #:PS2349309
Manufacturer #:134792700
This part is a heater, but may also be known as a heating element, and it is meant for your dryer. This is where the heat is generated during your machine cycle in order to properl...
In Stock
PartSelect #:PS417085
Manufacturer #:131168200
Sold individually.
In Stock
PartSelect #:PS2349312
Manufacturer #:134793600
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 in...
In Stock
PartSelect #:PS474458
Manufacturer #:5308027429
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temper...
In Stock
PartSelect #:PS2349395
Manufacturer #:137032600
In Stock
PartSelect #:PS12746506
Manufacturer #:5304523155
INCLUDES 5304523151 SHAFT, 5304523152 ROLLER, 5304523153 NUT, 5304523154 SPACER.
In Stock
PartSelect #:PS2349303
Manufacturer #:134786100
In Stock
PartSelect #:PS4704883
Manufacturer #:134711401
In Stock
PartSelect #:PS3495292
Manufacturer #:137380600
This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold i...
On Order
Questions and Answers for EWMED65HIW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Noisy Dryer

Belt – Part Number: 134719300
  • Customer: Philip from Oakland, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 17 of 21 people found this instruction helpful
When I described the noise to a YouTube appliance diagnostician, I was directed to check the felt seals front and back of the rotating drum for wear, tears, or foreign objects. As it happens the felt seals looked find and there were foreign objects so, not wanting to disassemble and reassemble the dryer more than I had, I ended up replacing all the replacea... read more

Dryer wasn't heating properly, drying took too long.

Dryer Heater Element – Part Number: 134792700
  • Customer: Steven from MARIETTA, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 15 of 18 people found this instruction helpful
Removed back of dryer with electric nut driver. Lots of screws. Removed old heating element to better access wires and thermostats. Removed baffle at end and transferred to new heater element. Transferred thermostats to new element, reconnected wiring in correct order. Installed new heater element in correct position using tab to locate. Replaced back o... read more

The clip broke off our sensor making it disconnect, thus we had in inoperable 'new' machine.

Moisture Sensor – Part Number: 134786100
  • Customer: Stacey from TWO RIVERS, WI
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
By undoing the single screw which holds the sensor in place, the old one falls off. To replace: simply pop the two wires on their connections (small metal studs on the back), slide clip/wire end of sensor in place and replace the screw. You are back in business! Very simple repair that a DIY can save a ton! read more