ESG366S Dacor Range - Overview
Sections of the ESG366S
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305
PartSelect #: PS16627342
Manufacturer #: DE81-02331A
$6.25
In Stock
SVC-MICRO SWITCH SET ESG366;86576,ERSD48
PartSelect #: PS16628911
Manufacturer #: DE81-04591A
$18.85
In Stock
SVC-SIDE TRIM RH;36543,ESG366SBK/LP
PartSelect #: PS16632352
Manufacturer #: DE81-09615A
$112.81
Special Order
Questions And Answers for ESG366S
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Flame was not even all around.
Cleaned the brass ring and replaced the cap.
New brass rings may be an improvement too.
New brass rings may be an improvement too.
Parts Used:
-
Keith from MIAMI, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
-
David from MCKINNEY, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All cooktop eyes started sparking at the same time, had to turn off at circuit breaker
Called local repair company and said that it wasn't fixable, had to go. It was 12 years old and they don't make them to last anymore. Next door neighbor is handy. He came over and got the part out and said to go downtown and get replacement part. It was late and I looked on the internet and saw your Hours of Op, called and got a Saint nam
... Read more
ed Lee. He and I went back and forth with photos and emails. He needs to be promoted. I have never had such a fun time at that hour discussing cooktop parts nor gotten the respect and customer service that is usually reserved for experienced repairmen, much less a woman. He went above and beyond. Plus he had personality, patience and encouragement. Instead of the $1200 that we had prepared for to replace our cooktop, we were out $35. Lee was phenomenal. I asked to speak to his supervisor to commend him and he declined! That is one self-fulfilled agent you have there. And I am so glad you sent this survey so that I get to tell you how amazing Lee is!!!
Read less
Parts Used:
-
Janice from Hoover, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!