EM3800SX Honda Generator - Overview
Models starting with EM3800SX
Click on the best match to narrow your results.
- EM3800SX (Type AVIN# GC04-4400001-9999999) Honda Generator (Generator)
- EM3800SX (Type ACVIN# GC04-4400001-9999999) Honda Generator (Generator)
- EM3800SX (Type ANVIN# GC04-4400001-9999999) Honda Generator (Generator)
- EM3800SXA Honda Generator (Honda Generator Model EM3800SXA Parts)
- EM3800SXAC Honda Generator (Honda Generator Model EM3800SXAC Parts)
- EM3800SXAN Honda Generator (Honda Generator Model EM3800SXAN Parts)
Keep searches simple, eg. "belt" or "pump".
Spark Plug
PartSelect #: PS10036941
Manufacturer #: 98079-55846
This is a genuine Honda replacement spark plug. It is sourced directly from original equipment manufacturer and it is sold individually. It is designed to ignite the air fuel mixture by the spark. If ...
$6.40
On Order
Washer-drain Plug-12mm
PartSelect #: PS10033397
Manufacturer #: 94109-12000
This metal washer is compatible with several different makes and types of small engine equipment, and is a genuine OEM part. Used to evenly distribute pressure on the oil drain from the drain bolt, th...
$6.40
In Stock
Bolt-flange-6x25-ct200
PartSelect #: PS10022289
Manufacturer #: 90121-952-000
This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The special hex head bolt is commonly used to secure the ignition module assembly. This ...
$6.40
In Stock
Element- Air Cleaner
PartSelect #: PS9903205
Manufacturer #: 17211-899-000
This is an original Honda replacement part that is manufactured for use with small engines. The purpose of the Air Cleaner Element is to filter dirt and debris from entering the engine and clogging it...
$10.70
On Order
Gasket- Ex. Pipe
PartSelect #: PS9911005
Manufacturer #: 18333-ZK6-Y00
This gasket is a genuine OEM replacement part designed to seal the area between the exhaust pipe and cylinder head. It has a length of 3 inches and a width of 1.5 inches. The gasket prevents exhaust g...
$6.40
On Order
Flange Nut
PartSelect #: PS10032444
Manufacturer #: 94050-08000
It is a genuine item that is supplied by the original manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. This is one of the flange nuts that are util...
$6.40
In Stock
Gasket- Fuel Strainer Cup
PartSelect #: PS9898881
Manufacturer #: 16173-001-004
This rubber fuel strainer cup gasket, found in your garden equipment, distributes pressure and creates a seal between the fuel strainer cup and the carburetor so that fuel does not leak. If it is brok...
$9.62
On Order
Tube Clip
PartSelect #: PS10034370
Manufacturer #: 95002-02080
This item is an authentic OEM part which is made for use with Honda engines commonly installed on a variety of lawn and garden equipment. The clip is utilized to secure the fuel tube. If the clip is d...
$6.40
On Order
Nut-flange-5mm
PartSelect #: PS10032439
Manufacturer #: 94050-05000
This is an authentic item that is supplied by the original equipment manufacturer for use with Honda engines commonly installed on lawn and garden equipment. Please make sure to check the appropriate ...
$6.40
Special Order
Bulk Hose-fuel-4.5x3000
PartSelect #: PS10034361
Manufacturer #: 95001-45003-60M
The fuel hose attaches to the tube clip and the fuel filter. This part is available individually. It is a genuine OEM sourced part which is specifically designed for use with Honda and Toro engines. Y...
$64.69
In Stock
Cap Assembly- Noise Suppressor
PartSelect #: PS9937677
Manufacturer #: 30700-ZE1-013
The noise suppressor cap assembly, also known as the spark plug cap/boot is responsible for connecting the spark plug to the ignition coil, and helping to reduce the amount of noise created when runni...
$29.47
On Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
this is a northern tool generator with a 420cc honda clone engine. it was running too lean from the factory, and would not idle properly and ran too hot
Like I said, this engine was way too lean from the factory. Being a honda clone engine, I was pretty sure honda carb jets would fit, I was right. A simple matter of removing the carb bowl and unscrewing the jet and installing the jet of your choice. The too lean factory jet was a 103. I ordered a 105 and a 108 to have options, I installed
... Read more
the 108 and it is perfect. The engine starts on the first pull, runs smooth and I can adjust the idle as low as I want to and it stays smooth. The exhaust is cooler and the exhaust even has a quieter note to it. This engine should last a long time now. On to the next projects. I ported the exhaust can on my husky chainsaw yesterday, and it definitely has more power now. Life is short, just do it!
Read less
Parts Used:
-
Jeff from Aylett, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!