EGR2 General Electric Range - Overview
Models starting with EGR2
Click on the best match to narrow your results.
- EGR2000EC0BB General Electric Range (Gas)
- EGR2000EC0CC General Electric Range (Gas)
- EGR2000EC0WW General Electric Range (Gas)
- EGR2000EC1BB General Electric Range (Gas)
- EGR2000EC1CC General Electric Range (Gas)
- EGR2000EC1WW General Electric Range (Gas)
- EGR2000EM1BB General Electric Range (Gas)
- EGR2000EM1CC General Electric Range (Gas)
- EGR2000EM1WW General Electric Range (Gas)
- EGR2000EM2BB General Electric Range
- EGR2000EM2CC General Electric Range
- EGR2000EM2WW General Electric Range
- EGR2000EM3BB General Electric Range
- EGR2000EM3CC General Electric Range
- EGR2000EM3WW General Electric Range
- EGR2000EM4BB General Electric Range
- EGR2000EM4CC General Electric Range
- EGR2000EM4WW General Electric Range
- EGR2000EM5BB General Electric Range
- EGR2000EM5CC General Electric Range
- EGR2000EM5WW General Electric Range
- EGR2001EM1SS General Electric Range (Gas)
- EGR2001EM2SS General Electric Range
- EGR2001EM3SS General Electric Range
- EGR2001EN1SS General Electric Range
- EGR2001EN2SS General Electric Range
- EGR2001EN3SS General Electric Range
- EGR2002EM1BS General Electric Range (Gas)
- EGR2002EM2BS General Electric Range
- EGR2002EM3BS General Electric Range
- EGR2002EM4BS General Electric Range
- EGR2002EM5BS General Electric Range
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter Kit
PartSelect #: PS231280
Manufacturer #: WB13K21
The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to light the oven burner. If you notice that your oven will not heat up properly...
$59.47
In Stock
Round Style Oven Igniter
PartSelect #: PS243425
Manufacturer #: WB2X9154
The round style oven igniter is also known as an oven bake or broil igniter and is compatible with your range appliance. The function of the round style oven igniter is to pull electrical current thro...
$95.01
In Stock
BURNER KNOB KIT
PartSelect #: PS16728966
Manufacturer #: WB03X43926
This replacement burner knob is designed to restore full functionality to your range when a knob becomes damaged or worn. Crafted from durable plastic with a sleek stainless-steel finish, it blends se...
$56.33
In Stock
Light Bulb - 40W
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
$20.37
In Stock
Top Burner Spark Electrode
PartSelect #: PS952858
Manufacturer #: WB13K10014
The top burner spark electrode, also known as a range surface burner igniter, is designed for use in your gas range. The function of this part is to provide the spark that lights the surface burner. I...
No Longer Available
Oven Rack
PartSelect #: PS6447646
Manufacturer #: WB48T10095
The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for e...
$73.86
In Stock
Double Burner Pan - Right Side
PartSelect #: PS244905
Manufacturer #: WB34K10009
This double burner pan works with your range to catch grease and debris during the cooking process. It is designed to fit under a small and large burner. Your range will have two double burner pans, o...
$52.02
In Stock
Double Burner Pan - Left Side
PartSelect #: PS244906
Manufacturer #: WB34K10010
This double burner pan works with your range to catch and grease and debris during the cooking process. It is designed to fit under a small and large burner. Your range will have two double burner pan...
$50.55
In Stock
Burner Head - Medium - 9500
PartSelect #: PS1020327
Manufacturer #: WB16K10055
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will n...
$56.80
In Stock
Burner Head - Large - 12K
PartSelect #: PS1480992
Manufacturer #: WB16T10046
This large surface burner head is designed for use with gas cooktops and ranges, delivering consistent heat output for everyday cooking. Rated at 12,000 BTUs, it distributes gas evenly through precisi...
$53.23
In Stock
Drawer Support
PartSelect #: PS2320972
Manufacturer #: WB02K10158
This is a replacement drawer support for your oven. The drawer support provides stability to the drawer unit as it opens and closes. If your oven drawer is hanging or will not slide in or out efficien...
$16.40
On Order
Small Burner - 5K
PartSelect #: PS3486550
Manufacturer #: WB16K10070
This genuine small burner is an original replacement part from GE, designed for use with a wide range of gas ranges. Positioned between the rangetop and bracket assembly and the burner cap, it plays a...
$51.39
In Stock
Common Symptoms of models starting with EGR2
[Viewing 9 of 9]Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No ignition
Unplug the oven.
Open the oven door.
Remove the racks.
Remove the two screws that hold the oven floor; they are located toward the back.
Remove the oven floor pan.
Remove the screw holding the heat shield/dispenser.
Remove the heat shield/dispenser.
Untwist the ceramic wire caps on the two igniter wires. ... Read more
Remove the two screws holding the igniter.
Remove the igniter.
Replace the igniter working all the steps backwards.
It’s super simple.
Open the oven door.
Remove the racks.
Remove the two screws that hold the oven floor; they are located toward the back.
Remove the oven floor pan.
Remove the screw holding the heat shield/dispenser.
Remove the heat shield/dispenser.
Untwist the ceramic wire caps on the two igniter wires. ... Read more
Remove the two screws holding the igniter.
Remove the igniter.
Replace the igniter working all the steps backwards.
It’s super simple.
Read less
Parts Used:
-
Mark from Upland, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
766 of 837 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The igniter glowed, but never got hot enough to ignite the propane, so I did smell propane.
First, I removed the two screws that held the heat shield in place. Second, I removed the one screw that held a small wire covering. That covering kept the wires inside the back wall of the range. Third, I removed the two screws that held the Igniter Kit, and unplugged it from the back of the range. I then carefully put the new ignite
... Read more
r in, and reassembled everything in reverse order. It only took about 30 minutes to do the repair, and 30 minutes of cleaning and wiping of the broiler area. (It is amazing what you see when you take things apart). I should have been wiping things up over the past few months. Overall, a very easy repair. I ordered the part at 12:30 in the afternoon, and FedEx delivered it the next morning at 11:30, all for the regular shipping price of $6.95. VERY HAPPY.....
Read less
Parts Used:
-
Sidney from Marysville, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
678 of 732 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broiler works, bake oven does not work.
Your website help me troubleshoot the problem and locate the part. Part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, ... Read more allows gas to flow through the safety valve
First, unplug the power sourse. For this repair it is not necessary to shut off the gas, but do so if it makes you more comfortable. Remove the oven door...it lifts right off. Next, remove the screws and lift out the bottom panel in the oven box. This will expose the igniter. Next, remove the lower drawer. Two 1/4-28 screws retain the igniter...remove these. With the drawer removed, go underneath and locate the 2 wires to the igniter. One has a green connector, and the other has a red connector. Disconnect these 2 wires and carefully remove the igniter and wires. Cut the wires from the igniter on the igniter end. You will need to reuse the plug end of each wire, so don't cut them too short. Splice these two wires to the new igniter with the wire splice caps provided. Feed the wires back down throught the opening at the back of the oven and carefully move the igniter into place. Install the two 1/4-28 retaining screws. Go back underneath the oven through the drawer opening and plug in the 2 wires. You should be good to go. Reassemble the oven and have mama bake a cake..
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, ... Read more allows gas to flow through the safety valve
First, unplug the power sourse. For this repair it is not necessary to shut off the gas, but do so if it makes you more comfortable. Remove the oven door...it lifts right off. Next, remove the screws and lift out the bottom panel in the oven box. This will expose the igniter. Next, remove the lower drawer. Two 1/4-28 screws retain the igniter...remove these. With the drawer removed, go underneath and locate the 2 wires to the igniter. One has a green connector, and the other has a red connector. Disconnect these 2 wires and carefully remove the igniter and wires. Cut the wires from the igniter on the igniter end. You will need to reuse the plug end of each wire, so don't cut them too short. Splice these two wires to the new igniter with the wire splice caps provided. Feed the wires back down throught the opening at the back of the oven and carefully move the igniter into place. Install the two 1/4-28 retaining screws. Go back underneath the oven through the drawer opening and plug in the 2 wires. You should be good to go. Reassemble the oven and have mama bake a cake..
Read less
Parts Used:
-
Robert from Hebron, CT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench set
604 of 787 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!