EC7500 Shindaiwa Chainsaw - Overview
Sections of the EC7500
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Purge Bulb
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$9.80
In Stock
Fuel Filter Assy.
PartSelect #: PS16478678
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$11.70
In Stock
Spark Plug-bpmr-7a
PartSelect #: PS8869847
Manufacturer #: 15901010230
This spark plug is is a high quality item commonly utilized on Echo and Shindaiwa gas powered lawn and garden equipment. The purpose of a spark plug is to deliver the electric current from an ignition...
$6.14
In Stock
Clip
PartSelect #: PS9238696
Manufacturer #: V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a l...
$6.40
In Stock
Connector
PartSelect #: PS10053516
Manufacturer #: V186000210
This is a genuine replacement part manufactured for use with gas-powered lawn and garden equipment. The special plastic connector couples pieces of fuel line usually near the grommet on the fuel tank....
$6.40
In Stock
Screw-6x20
PartSelect #: PS9151016
Manufacturer #: 90010506020
This is a genuine manufacturer-sourced replacement part which is specially designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It is a standard hardware which has multiple app...
$6.40
In Stock
Bolt
PartSelect #: PS9246212
Manufacturer #: V204000690
This is a genuine Shindaiwa replacement part that is sourced from the original manufacturer to be used with power cutter saws and chainsaws. The hex socket head bolt is used with several different typ...
$6.40
In Stock
Strainer
PartSelect #: PS9261206
Manufacturer #: 12312610631
This is an original replacement part manufactured for use with outdoor power equipment. The strainer is used with many different types of equipment and is commonly used in the carburetor fuel system. ...
$6.40
Special Order
Chainsaw Fuel Pump Gasket
PartSelect #: PS8855073
Manufacturer #: 12312512330
This authentic item is supplied by the original equipment manufacturer for use with Echo and Shindaiwa chainsaws. The gasket is utilized to provide a tight seal for the fuel pump, unfortunately, over ...
$6.40
In Stock
Washer
PartSelect #: PS9242125
Manufacturer #: V323000080
This is an authentic manufacturer-sourced replacement part which is specially made for use on Echo and Shindaiwa handheld lawn and garden equipment. It helps to distribute the pressure evenly and prov...
$6.40
In Stock
Cushion 26
PartSelect #: PS9238019
Manufacturer #: V401000430
This is an original replacement part sourced directly from the manufacturer. The cushion is found in Shindaiwa chainsaws and cut-off saws. This part is placed on the sides of the rear handle engine ...
$10.88
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
-
Richard from SPRING HILL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
17 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!