Models
>
EB8510
EB8510 Shindaiwa Leaf Blower / Vacuum - Overview
Sections of the EB8510
[Viewing 12 of 12]
Keep searches simple, eg. "belt" or "pump".
Primer Pump
PartSelect #: PS8858167
Manufacturer #: 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches...
$4.99
In Stock
Filter, Fuel
PartSelect #: PS11826309
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$8.60
In Stock
Gasket
PartSelect #: PS9237390
Manufacturer #: V107000010
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will ...
$5.19
In Stock
Washer 5
PartSelect #: PS9308885
Manufacturer #: 90060300005
This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing b...
$5.19
In Stock
Breather Assembly
PartSelect #: PS9314032
Manufacturer #: A356000040
This breather, also known as a fuel tank vent, is a genuine OEM replacement part used in trimmers and edgers. It is responsible for managing the pressure and air flow inside the fuel system, by acting...
$6.52
In Stock
Clip 6
PartSelect #: PS9238696
Manufacturer #: V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a l...
$4.99
In Stock
Plug, Spark Ngk Cmr5H
PartSelect #: PS10022281
Manufacturer #: 90118
This nickel spark plug is used in the ignition system of your lawn equipment and is located at the top or side of the engine cylinder. It has a 10mm thread diameter, 1.0mm thread pitch, 16mm hex size,...
$7.04
In Stock
Primer Cover
PartSelect #: PS8857330
Manufacturer #: 12314205560
This genuine Primer Cover, or Primer Pump Cover, is a silver, individually sold, steel part with dimensions of around 1x1 inch.
This part is installed using a screwdriver, and is rated as Easy to ins...
$4.99
In Stock
Questions And Answers for EB8510
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!