Models > E36DF76GPS2

E36DF76GPS2 Electrolux Range - Overview

Sections of the E36DF76GPS2

[Viewing 7 of 7]

Manuals & Care Guides for E36DF76GPS2

Click to download
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: 316217002
Temperature Sensor
★★★★★
★★★★★
(14)
PartSelect #: PS820208
Manufacturer #: 316217002
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut o...
$48.25
  In Stock
Order within the next 6 hrs and your part ships today!
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(12)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$15.12
  In Stock
Order within the next 6 hrs and your part ships today!
Indicator Light Lens – Part Number: 318228310
Indicator Light Lens
★★★★★
★★★★★
(5)
PartSelect #: PS1765368
Manufacturer #: 318228310
This is a red indicator light lens for an oven that covers the indicator light for the surface element. The indicator light signifies when the element is on and heated. This part is sold individually....
$16.94
  In Stock
Order within the next 6 hrs and your part ships today!
Steel Washer – Part Number: 316008401
Steel Washer
PartSelect #: PS436497
Manufacturer #: 316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter....
$17.42
  In Stock
Order within the next 6 hrs and your part ships today!
Igniter/Orifice Mounting Screw – Part Number: 316240600
Igniter/Orifice Mounting Screw
★★★★★
★★★★★
(1)
PartSelect #: PS440022
Manufacturer #: 316240600
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
$17.84
  Special Order
Screw with White Top -#10-32 X 3/4 – Part Number: 240442708
Screw with White Top -#10-32 X 3/4
PartSelect #: PS1765209
Manufacturer #: 240442708
Sold individually.
$6.97
  In Stock
Order within the next 6 hrs and your part ships today!
Burner Mounting Screw – Part Number: 316540900
Burner Mounting Screw
PartSelect #: PS2361437
Manufacturer #: 316540900
Sold individually.
$17.70
  In Stock
Order within the next 6 hrs and your part ships today!
MOTOR – Part Number: 5304528973
MOTOR
PartSelect #: PS16555576
Manufacturer #: 5304528973
$45.35
  On Order
SPARK MODULE – Part Number: 808608804
SPARK MODULE
★★★★★
★★★★★
(1)
PartSelect #: PS11770793
Manufacturer #: 808608804
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$50.37
  In Stock
Order within the next 6 hrs and your part ships today!
Door/Bracket Screw – Part Number: 215822000
Door/Bracket Screw
PartSelect #: PS423766
Manufacturer #: 215822000
Sold Individually.   No Longer Available
Oven Door Light Switch – Part Number: 316445501
Oven Door Light Switch
PartSelect #: PS1146808
Manufacturer #: 316445501
This oven door light switch signals the light to turn off when the oven door closes. If your light switch is defective or you smell a burning odor, make sure to check the switch and replace it. The to...
$74.23
  In Stock
Order within the next 6 hrs and your part ships today!
Door Spacer – Part Number: 318165800
Door Spacer
PartSelect #: PS978528
Manufacturer #: 318165800
$14.31
  In Stock
Order within the next 6 hrs and your part ships today!

Questions And Answers for E36DF76GPS2

Be the first to ask our experts a question about this model!

Common Symptoms of the E36DF76GPS2

[Viewing 7 of 7]
Little to no heat when baking
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Parts Used:
Temperature Sensor
  • Dan from Bellevue, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
144 of 217 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
Main Terminal Block Kit
  • Timothy from Spring Valley, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
90 of 138 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't operated. Error code F9
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Parts Used:
MOTOR
  • Richard from Centennial, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
49 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!