DW80H9930US (AA-0000) Samsung Dishwasher - Overview
Sections of the DW80H9930US
[Viewing 8 of 8]Keep searches simple, eg. "belt" or "pump".
Door Guide Cap
PartSelect #: PS12721288
Manufacturer #: DD67-00113B
This dishwasher door cap guide is a genuine OEM replacement designed for Samsung WaterWall dishwashers. The door cap guide serves an aesthetic purpose by hiding mounting screws or other hardware on th...
$6.40
In Stock
Dishwasher Tub Gasket
PartSelect #: PS10058976
Manufacturer #: DD62-00097B
The tub gasket creates a watertight seal between the dishwasher tub and door.
$117.51
In Stock
Motor Pump Oil Shaft Seal
PartSelect #: PS4222439
Manufacturer #: DD62-00053A
SEAL-OIL;DMR78,NBR,BLK,R
$52.67
In Stock
Leveling Leg
PartSelect #: PS9606365
Manufacturer #: DD61-00331B
Optimize your kitchen with the genuine Samsung Foot Free Standing. Designed specifically for select Samsung dishwashers, this product levels your appliance, ensuring optimal performance. It serves as ...
$30.53
In Stock
Dishwasher Drain Pump
PartSelect #: PS9606350
Manufacturer #: DD31-00016A
The drain pump removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. 120V/230
$169.49
In Stock
Sensor
PartSelect #: PS9606354
Manufacturer #: DD32-00011A
This wash vane sensor (part number DD32-00011A) is for dishwashers. Wash vane sensor DD32-00011A monitors the position of the wash vane motor and communicates the position to the electronic control bo...
$64.69
In Stock
Questions And Answers for DW80H9930US
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
February 3, 2022
I have not been able to clear the 7e error code. I have removed the lower rack, tried unplugging it also. Is there supposed to be a magnet in the water reflector because i don't see any evidence that there was a magnet in the arm. It is particularly noisy on start-up and then the error comes on.
For model number DW80H9930US
Hi Rebecca,
Thank you for your question. If the waterfall reflector on the center rail on the bottom of the dishwasher interior is unable to move or not correctly positioned when the dishwasher is in use, the 7E error code will appear. Check and see if anything is restricting its movement and make sure it is in the correct position. The center rail is in the correct position when the waterfall logo faces forwards and upwards. If your dishwasher was recently installed, also check and make sure that the packing tape has been removed from it. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Did this question help you?
Thank you for voting!
Related Parts:
Tracy
January 5, 2023
I have a LE error code and it won't turn off keep trying to suck water. I had to shut off the breaker. How do I determine the problem or where it is leaking from? I can't get it out from under the counter. The bottom right is stuck and all visible screws have been removed.
For model number DW80H9930US
Hi Tracy,
Thank you for your question. The LE error code indicates that there is a water leak under the dishwasher. You can try clearing the code by pressing the power button to turn the washer display off. Once the display is off, disconnect power to the washer. Press and hold the start button for 5 seconds and then reconnect the power. If this does not help, you will need to check the hoses and the drain pump to see which part is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Did this question help you?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the DW80H9930US
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My front panel on my dishwasher was dented.
Extremely easy! Unscrewed 6 screws and simply put the panelin place and screwed back into place! Perfect fit!
We just finished a kitchen remodel and that was the only eyesore. Thank you Part Select!
We just finished a kitchen remodel and that was the only eyesore. Thank you Part Select!
Parts Used:
-
Cheryl from PASCOAG, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!