DV45DG6000HWAC Samsung Dryer - Overview
Sections of the DV45DG6000HWAC
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Thermal Fuse
PartSelect #: PS4205212
Manufacturer #: DC47-00015A
The thermal fuse measures the air temperature inside your dryer drum, and turns the heat on and off to maintain the optimal temperature during the drying cycle. If your dryer will not start, dry cloth...
$45.29
In Stock
Door Switch
PartSelect #: PS4210965
Manufacturer #: DC64-00828B
Introducing the Samsung Dryer Door Switch, a genuine, high-quality accessory for your Samsung dryer. This top-notch replacement part, also known as a door jamb switch, swiftly rectifies your broken or...
$55.29
In Stock
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
$6.40
In Stock
Hinge Guide
PartSelect #: PS4206023
Manufacturer #: DC61-00891A
This door hinge guide (part number DC61-00891A) is for dryers. Door hinge guide DC61-00891A holds and supports the door hinge on the front panel. Unplug the dryer before installing this part. Wear wor...
$55.29
Special Order
Questions And Answers for DV45DG6000HWAC
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DV45DG6000HWAC
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
DRYER HAD NO POWER AND WOULD NOT POWER ON.
NECESSARY REQUIREMENTS TO DISMANTLE AND TAKE OFF DRYER CASING USING SCREWDRIVER AND NEEDLE NOSE PLIERS TO REPLACE THERMAL FUSE LOCATED ON THEHEATING ELEMENT CASING.TOOK ME HALF HOUR REPLACED PART AND PROCEDED TO PUT EVERYTHING BCK IN PLACE.PLUGGED BACK INTO SOCKET .whalla IM UP AND RUNNING AGAIN.DIFFICULTY RATING 1 TO 10-3.thanks 4 your s
... Read more
upport this was not difficult or hard just required TIME & PATIENCE. Thank u once again.THIS SITE IS THE GREATEST.
Read less
Parts Used:
-
Calvin from LEXINGTON PK, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not drying
Unplugged the dryer for safety. Unattached top of dryer from door with putty tool. Took front of dryer off. Unplugged door. Took off bracket to heating element case. Pulled out case. Replaced the thermostat. Then put all back together and tested the dryer. Works like a charm.
Parts Used:
-
Dawn from CAMBY, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!