DV42H5000EW Samsung Dryer Parts & Repair Help | PartSelect
Models > DV42H5000EW (A3-0003)

DV42H5000EW (A3-0003) Samsung Dryer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(14)
PartSelect #:PS4204984
Manufacturer #:DC32-00007A
This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The mo...
$19.82
In Stock
(13)
PartSelect #:PS4133825
Manufacturer #:6602-001655
The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take ...
$42.19
In Stock
(5)
PartSelect #:PS4205213
Manufacturer #:DC47-00016A
This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the drye...
$21.21
In Stock
(12)
PartSelect #:PS4205218
Manufacturer #:DC47-00019A
This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does not heat or over heats, or clothes ta...
$158.87
In Stock
(8)
PartSelect #:PS4205212
Manufacturer #:DC47-00015A
The thermal fuse measures the air temperature inside your dryer drum, and turns the heat on and off to maintain the optimal temperature during the drying cycle. If your dryer will ...
$24.59
In Stock
(13)
PartSelect #:PS11771601
Manufacturer #:DC93-00634A
$56.09
In Stock
(6)
PartSelect #:PS4221885
Manufacturer #:DC97-16782A
The drum support roller and axle, which includes the roller shaft and mounting clips, is used in dryers. This part holds the drum as it rotates on the support wheels. When the roll...
$39.96
In Stock
(1)
PartSelect #:PS4205217
Manufacturer #:DC47-00018A
The high limit thermostat is designed for use in your dryer. The function of this part is to make sure that your dryer does not get too hot. If your dryer is not regulating heat pr...
$34.72
In Stock
(17)
PartSelect #:PS4220205
Manufacturer #:DC97-14486A
$155.61
In Stock
(1)
PartSelect #:PS4206812
Manufacturer #:DC61-02627A
$6.67
In Stock
Questions and Answers for DV42H5000EW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The dryer turned on but the drum did not move when you pressed start even though It started it cycles.

Drive Belt – Part Number: 6602-001655
  • Customer: Christopher from SUGARLOAF, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 13 people found this instruction helpful
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you read more

Tension/Dead Man Wheel Broke/Shattered

Idler Pulley Assembly – Part Number: DC93-00634A
  • Customer: Noah from OXFORD, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Dryer would not start but electronics were working.

Pulled top of dryer off; noticed the belt was loose but not broken.
Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.

Ordered replacement wheel/arm.
One screw to remove old one, one screw to ... read more

DRYER HAD NO POWER AND WOULD NOT POWER ON.

Thermal Fuse – Part Number: DC47-00015A
  • Customer: Calvin from LEXINGTON PK, MD
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
NECESSARY REQUIREMENTS TO DISMANTLE AND TAKE OFF DRYER CASING USING SCREWDRIVER AND NEEDLE NOSE PLIERS TO REPLACE THERMAL FUSE LOCATED ON THEHEATING ELEMENT CASING.TOOK ME HALF HOUR REPLACED PART AND PROCEDED TO PUT EVERYTHING BCK IN PLACE.PLUGGED BACK INTO SOCKET .whalla IM UP AND RUNNING AGAIN.DIFFICULTY RATING 1 TO 10-3.thanks 4 your support this was not ... read more