Models > DHU709

DHU709 Amana Microwave Oven Combo - Overview

Sections of the DHU709

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(63)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$7.32
  In Stock
Wire Oven Rack – Part Number: WP314763J
Wire Oven Rack
★★★★★
★★★★★
(2)
PartSelect #: PS11740769
Manufacturer #: WP314763J
This wire oven rack is used on some ovens and ranges. It is twenty-three inches long and it is made of metal.
$37.93
  In Stock
Hex Nut – Part Number: WP488130
Hex Nut
★★★★★
★★★★★
(2)
PartSelect #: PS11742711
Manufacturer #: WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air cond...
$9.24
  In Stock
Hinge Kit - Right Side – Part Number: R0706011
Hinge Kit - Right Side
PartSelect #: PS2172201
Manufacturer #: R0706011
The hinge kit, or oven door hinge, is used in ranges and wall ovens. The hinge attaches to the right side of the door and controls how fast the door opens. At a specific angle, it allows the door to r...   No Longer Available
Clock Knob – Part Number: 315210B
Clock Knob
PartSelect #: PS2032461
Manufacturer #: 315210B
This clock knob does not come with a tension spring insert.   No Longer Available
Flourescent Lamp – Part Number: WPY0067945
Flourescent Lamp
PartSelect #: PS11757431
Manufacturer #: WPY0067945
Sold individually.
$20.63
  In Stock
Surface Igniter – Part Number: 4157608
Surface Igniter
PartSelect #: PS353641
Manufacturer #: 4157608
$57.95
  In Stock
Screw – Part Number: WPW10068250
Screw
PartSelect #: PS11748102
Manufacturer #: WPW10068250
$3.96
  In Stock
BALLAST – Part Number: 74003033
BALLAST
PartSelect #: PS2081238
Manufacturer #: 74003033
  No Longer Available
GRATE, DELUX – Part Number: Y07517400
GRATE, DELUX
PartSelect #: PS2197349
Manufacturer #: Y07517400
This single square gas burner grate is black in color and has sides measuring just over eight inches. This burner grate is used on Amana brand gas ranges.   No Longer Available
DISCONTINUED – Part Number: Y0067844
DISCONTINUED
PartSelect #: PS2187883
Manufacturer #: Y0067844
  No Longer Available
SWITCH-CLEAN/PRIMARY – Part Number: Y0067919
SWITCH-CLEAN/PRIMARY
PartSelect #: PS2187896
Manufacturer #: Y0067919
  No Longer Available

Questions And Answers for DHU709

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the DHU709

[Viewing 1 of 1]
Door won’t close
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rivet broke on the right side oven door hinge
Regarding my right side oven door hinge replacement, P/N PS2172201

After reading that other people had trouble threading the screws into the new hinge, I looked at the drilled mounting holes in the new hinge. Neither hole was threaded. The smaller hole used a self tapping sheet metal screw which works fine. The larger hole gets a machine screw and will not self tap. Since the instructions say put the screw in "once" to tap the holes before installing the hinge, I tried this. It doesn't work, regardless of what the instructions say. The larger hole should come from the manufacture threaded. I do have a tap and die set so I tapped the hole myself. After that, the installation is a 5 min. ordeal.

Take the two screws, one on each side, out that hold the oven door on the hinges. The door will then pull straight off the hinges. Take the storage drawer below the oven out. Unscrew the top and bottom hinge screws and pull the old hinge out from inside at the bottom. Put the new "threaded" hinge into position and hold from the bottom, inside. Screw in the two screws, large one on the top end, and put the door back on. You can open both hinges about 30 degrees to allow the door to slide back on the hinges easily. Put the last two screws in that hold the door to the hinges and you are done.

Really very easy and saved several hundred dollars in repair bills. I might add that my hinge arrived on time 3 or 4 days after the order was placed.
Parts Used:
Hinge Kit - Right Side
  • Roger from Pleasanton, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light bulb in water ice freezer door went bad
I didn't. Don't know how to get to light bulb to change it for this specific model
Parts Used:
Light Bulb - 40W
  • Carl from RIVERSIDE, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old hinge snapped a rivet. It could no longer hold the weight of the door.
I removed the two screws and pryed out the old hinge. I then put in the new hinge. The new one fit well. I went to screw it in with the supplied screws. The screws not only did not fit the hole tapped in the hinge (too big, different tread) but both screws were different from each other. They were different sizes and different types all together. I tried re-using the screws from the originol hinge but they also did not fit. I then got my own self tapping machine screws and finished the job. This job should not have been that hard. If they had supplied the correct screws, It would have taken all of five minutes.
Parts Used:
Hinge Kit - Right Side
  • Frank from Farmingdale, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!