DET400F1W Kelvinator Dryer Parts & Repair Help | PartSelect
Models > DET400F1W

DET400F1W Kelvinator Dryer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(92)
PartSelect #:PS459829
Manufacturer #:5303281153
This rear drum bearing kit is designed for use with dryers. It supports the rear of the drum in your appliance as it tumbles your clothes during the drying cycle. If your drum will...
$31.19
In Stock
(26)
PartSelect #:PS470317
Manufacturer #:5303937139
The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease a...
$36.02
In Stock
(18)
PartSelect #:PS418807
Manufacturer #:131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear b...
$5.22
In Stock
(18)
PartSelect #:PS418433
Manufacturer #:131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, w...
$40.75
In Stock
PartSelect #:PS417677
Manufacturer #:131390300
This filter collects lint as it passes through the dryer vent.
No Longer Available
(2)
PartSelect #:PS12579101
Manufacturer #:131724301
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
$9.39
On Order
(4)
PartSelect #:PS459830
Manufacturer #:5303281154
This is a flat style ridgeless dryer belt.
$20.48
In Stock
(3)
PartSelect #:PS457526
Manufacturer #:5303212849
Use this idler pulley assembly with gas or electric clothes dryer that has a flat dryer belt. ***Please NOTE: This part has been redesigned by the manufacturer and may not fit you...
No Longer Available
PartSelect #:PS459766
Manufacturer #:5303281019
This grounding ball is used in dryers and works to prevent friction in the rear bearing when the drum rotates. If your dryer is making a squealing, loud, banging noise or will not ...
$17.52
In Stock
(1)
PartSelect #:PS459776
Manufacturer #:5303281049
Used with dryers with a 27-inch drum.
$14.68
In Stock
Questions and Answers for DET400F1W
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Loud Squeaking

Rear Drum Bearing Kit – Part Number: 5303281153
  • Customer: Frank from Boyertown, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 308 of 317 people found this instruction helpful
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Acc... read more

Drum glide wore down and caused close to get stuck between drum and front panel.

Upper Drum Glide – Part Number: 5303937139
  • Customer: William from Boise, ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 178 of 244 people found this instruction helpful
Unpluged dryer. Removed the top of dryer by pushing in a retaining clip on both sides of the front lip with a screw driver. Remove the two screws on both sides of front panel. These screws are square head or phillips #2. Unplugged the wiring harness to front panel (make sure power has been disconnected). Support drum and lean front panel away from dryer ... read more

Torn Lint Screen

Lint Screen and Frame – Part Number: 131390300
  • Customer: David from Birmingham, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 36 of 42 people found this instruction helpful
Actually, I didn't install the frame. I only needed the lint screen. So EASY, obviously... I just placed the new lint screen in the old frame. We had been messing around with the torn lint screen for more than one year. Installing the new part was as easy as ordering from PartSelect. read more