DDW24G9000APDA (0000) Samsung Washer - Overview
Sections of the DDW24G9000APDA
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Install Bracket
PartSelect #: PS10058975
Manufacturer #: DD61-00465A
This genuine OEM installation bracket, or mounting bracket, anchors the appliance to the surrounding cabinets, so that it stays in place and does not shift during operation. They hold the unit under t...
$6.40
In Stock
Door Guide Cap
PartSelect #: PS12721288
Manufacturer #: DD67-00113B
This dishwasher door cap guide is a genuine OEM replacement designed for Samsung WaterWall dishwashers. The door cap guide serves an aesthetic purpose by hiding mounting screws or other hardware on th...
$6.40
In Stock
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
$6.40
In Stock
VALVE-WATER
PartSelect #: PS4209101
Manufacturer #: DC62-30314L
200 PSI Sizes 2"-12", 150 PSI Sizes 14"-Up, Wafer Type/Gear, Iron Body, Alum
Bronze Disc, Buna-N Seat, 416 Stainless Steel Stem, MSS-SP-67, ISO 5211 Mounting Cartridge Seat
$130.68
In Stock
Drain Hose Assembly
PartSelect #: PS12749174
Manufacturer #: DD97-00403E
The drain hose carries drain water from the dishwasher to the drain.
$99.25
In Stock
Questions And Answers for DDW24G9000APDA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DDW24G9000APDA
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I replaced the pump assembly with a new drain hose
This is not a repair for the faint of heart. You will have to pretty much disassemble the entire dishwasher to replace the main pump assembly. And it’s not cheap, between the pump assembly and the hose...it was over $300...
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump a ... Read more ssembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump a ... Read more ssembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
Read less
Parts Used:
-
Mark from kennewick, WA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
18 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water
1) Unplugged unit
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply va ... Read more lve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply va ... Read more lve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
Read less
Parts Used:
-
James from Big Spring, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!