Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
I removed only 3 screws that allowed me to lift the glass top on the stove. I removed the burner and I could see where it short circuited. I ordered the new burner element. After it arrived I replaced it by moving the wires from the old element to the new element, and put it back together. I am sure that I saved at least $200 in "lab
... Read moreor".
1. Flip "OFF" circuit breaker. 2. Pull out range unit from wall. 3. Unplug range unit. 4. On the back of the range unit, remove 4 screws holding lower rear cover using a phillips head screwdriver. 5. Remove lower rear cover. 6. Unplug temperature sensor connector (1 wire connector located upper right section behin
... Read mored oven). 7. From inside oven (upper left, back corner), remove 2 screws holding temperature sensor unit using a Phillips head screwdriver. 8. Remove old temperature sensor unit. 9. Insert new temperature sensor unit (wire connector end first) through opening and secure reusing old screws. 10. Re-connect temperature sensor connector. 11. Re-attach and secure lower rear cover reusing 4 old screws. 12. Plug in range unit. 13. Move range unit back to desired location. 14. Flip "ON" circuit breaker.
.gif "MISCELLAEOUS INFORMATION Diagram and Parts List for PDCF4205AW0 Amana Range")
