Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DC610EXD3

DC610EXD3 Frigidaire Dryer - Overview

Get Parts and Repair Help for DC610EXD3

If you know the dryer repair part you need, you can browse the list of all parts on the DC610EXD3, or you can search by name or part description. You can also find your part by where it is located on the DC610EXD3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DC610EXD3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.94

Door Latch Kit

The door latch is designed to keep your dryer door closed, even during the drying cycle. If your dryer door will not stay closed, the drying cycle might not start, or it could stop...

Order within the next 8 hrs and your part ships today!
$3.62

Main Terminal Block Kit

Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.

Order within the next 8 hrs and your part ships today!
$28.28

Power Resistor

This part helps the timer advance while in the Automatic Dry cycle.

Order within the next 8 hrs and your part ships today!
$32.01

BELT

Order within the next 8 hrs and your part ships today!
$4.79

SCREW

Order within the next 8 hrs and your part ships today!

SWITCH-DOOR

$6.17

Screw

Sold individually.

$36.54

THERMOSTAT

This thermostat heater assembly is used for dryers and is attached to the operating thermostat. The function of this part is to automatically regulate temperature and make sure the dryer does not overheat. If any of the following symptoms occur, replacing the thermostat can be the solution to your problem: clothes are still damp, dryer not shutting off when the timer goes off, or your dryer overheats. Remember to unplug your appliance from the power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.

Order within the next 8 hrs and your part ships today!
$5.71

SCREW 10-32X.375 CO

Order within the next 8 hrs and your part ships today!
$6.30

SCREW

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Catch broke, door wouldn't stay closed.

  • Customer: Dianne from Kansas City, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 62 of 66 people found this instruction helpful
Used a screwdriver to pop out broken piece. Used pliers to snap in new one. read more

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 63 of 103 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more

Broken door latch receptical

  • Customer: Joseph from North Chatham, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 20 people found this instruction helpful
Removed broken part. Pressed replacement into opening. read more