Models
>
CVGX2423W
CVGX2423W Jenn-Air Cooktop - Overview
Sections of the CVGX2423W
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
Cooktop Downdraft Vent Grease Filter
PartSelect #: PS11757584
Manufacturer #: WPY706012
This is a grease filter, and it works with your range/stove/oven. This part is chrome-colored and measures 16.5 inches long by 9 inches wide. It is made of metal and is intended for use with downdraft...
$48.41
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
Spark Igniter
PartSelect #: PS11744544
Manufacturer #: WP7432P109-60
This part creates the spark that lights the gas and starts the burners.
$52.81
On Order
Burner Grate
PartSelect #: PS2077025
Manufacturer #: 71001006
Light gray in color. Sold individually.
No Longer Available
Stand Mixer Screw
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$8.63
In Stock
Motor Isolator
PartSelect #: PS11743903
Manufacturer #: WP71003558
This motor isolator is less than an inch long.
$8.03
In Stock
Vent Fan Control Switch
PartSelect #: PS11744497
Manufacturer #: WP7403P876-60
Downdraft vent fan control switch activates and controls the speed of the downdraft fan motor in the cooktop.
$142.34
In Stock
Burner Cap - Large
PartSelect #: PS11744159
Manufacturer #: WP74007200
Sold individually.
No Longer Available
Mounting Nut
PartSelect #: PS11743922
Manufacturer #: WP7103P178-60
Sold individually.
$7.59
In Stock
Air Inlet Grill
PartSelect #: PS2077285
Manufacturer #: 71001673
This part is located over top of the blower in the center of the stove top.
No Longer Available
Questions And Answers for CVGX2423W
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Liv
February 22, 2020
Can you please give me the dimensions of this cooktop. I need to replace it and i don't know what size to replace it with. I see 30" 36" etc... please advise
thank you
For model number CVGX2423W
Good Day Liv. Thank you for your question in regards to your unit (Model Number CVGX2423W). The following URL will take you to the Owner's Manual of your unit which has the dimensions you are looking for: https://www.manualslib.com/manual/486120/Jenn-Air-Expressions-Cvgx2423b.html#product-EXPRESSIONS%20CVGX2423W. We hope this helps! Best Regards.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the CVGX2423W
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burners kept clicking after ignited
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I
... Read more
did was grab the head burners and grind them back and forth into the base burners with the weight on the heal of my hand. Steel wool or sandpaper would work too--you just want to clean the surfaces to restore electrical contact.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
Read less
Parts Used:
-
Robert from Ranchos de Taos, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
27 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Grease Filter For Downdraft Stove Top
Lift off blower vent cover. Lift out old filter. Clean walls and bottom of down draft using degrease soap and warm water. Dry. Discovered my grease filter will not install diagonally as shown in unit manual. Decided to drop into downdraft and put in front of fan suction. Found this left a gap at the top of fan suction that was not co
... Read more
vered by the filter. Cut piece of wood 1 inch thick and width and length to drop down in the downdraft and lay on bottom. Set filter on top of wood in front of the fan suction. Verified that fan suction would pull filter tight against the opening by turning fan on and off. Put vent cover back over downdraft and told wife I was done.
Read less
Parts Used:
-
Johnnie from Daphne, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
27 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter was starting to come apart from frequent cleaning.
I removed the center vent and inserted the filter...easy as pie...I went to your website and everything was there in an easy to follow way that even I could understand, my husband was totally impressed that I took care of it on my own....silly man.....it was so easy and delivery was extremely quick....so simple....thank you for making it
... Read more
so!!!!
Read less
Parts Used:
-
Mary H. from Appleton, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!