CS-4400 Echo Chainsaw - Overview
Models starting with CS-4400
Click on the best match to narrow your results.
- CS-4400 (Type 1E -After S/N 101001) Echo Chainsaw (Chainsaw)
- CS-4400 (Type 1E -001001 - 101000) Echo Chainsaw (Chainsaw)
- CS-4400 (Type 1 -After S/N 001001) Echo Chainsaw (Chainsaw)
- CS-4400 ( Type 1 001001 - 101000 ) Echo Chainsaw (Chainsaw)
- CS-4400 ( Type 1E 101001 - 999999 ) Echo Chainsaw (Chainsaw)
Keep searches simple, eg. "belt" or "pump".
Leaf Blower Fuel Tank Vent
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$10.97
In Stock
Nut Flange
PartSelect #: PS9236120
Manufacturer #: V265000200
This flanged hex nut is a genuine OEM steel fastener specifically designed for use in chainsaws and chop saws, serving the purpose of securing various components in these outdoor power equipment devic...
$6.40
In Stock
Fuel Filter Assy.
PartSelect #: PS16478678
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$11.70
In Stock
Cap
PartSelect #: PS11826579
Manufacturer #: P021044580
Genuine OEM replacement part used on Echo chainsaws. This part keeps the fuel tank sealed and prevent gasoline from leaking. This item includes a retainer that remains in the tank to keep the fuel cap...
$6.40
In Stock
Fuel Line Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$6.40
In Stock
Screw
PartSelect #: PS9153138
Manufacturer #: 90023805016
This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for...
$6.40
Special Order
Trimmer Spark Plug Coil
PartSelect #: PS9263507
Manufacturer #: 15901103432
This spark plug wire, also known as a spark plug coil or spark plug cap coil, is compatible with various makes and models of hand-held outdoor power equipment and is sold individually. This wire is in...
$6.40
In Stock
Washer 5
PartSelect #: PS9308885
Manufacturer #: 90060300005
This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing b...
$6.40
In Stock
Spark Plug Cap
PartSelect #: PS8872175
Manufacturer #: 15901201620
This replacement spark plug cap is a genuine OEM sourced item designed for use on handheld lawn and garden equipment. It is used to insulate the plug and wire terminal. Over time rubber material can d...
$6.40
In Stock
Stud-guide Bar
PartSelect #: PS9954627
Manufacturer #: 43301119831
This authentic item is supplied directly from the original equipment manufacturer for use with chainsaws and engines made by Echo. The stud attaches to the crankcase. A wrench may be necessary during ...
$6.40
In Stock
Starter Cover Screw
PartSelect #: PS17016293
Manufacturer #: V202000830
This Genuine OEM screw is a standard replacement part used on a variety of gas-powered trimmers and brushcutters. Constructed from durable metal and sold individually, this screw is typically used to ...
$6.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My 5 year old Echo CS 4400 had a chain brake malfunction with stressed spring metal
The new one arrived in the mail 6 days later than suggested in the order. The two holes for attaching the brake to the saw were drilled 3/32 too far apart and had to file plastic and metal to get it on. When I got into the woods to work, the orange plastic paddle had been redesigned and was too close to the handle by an inch or two. Now m
... Read more
y gloved hand (winter in Maine) caused the brake paddle to constantly engage the brake and stop the saw. I tried to loosen the nut to change the paddle location but the nut is on a bolt with a round Philips head and the bolt turns with the nut. I hack sawed a kerf in the Philips to get a real screw-driver on it and eventually got it apart to find the paddle position can't be altered. Assign a bunch of desk-jockey engineers to a project and so long as it looks pretty it's done, don't matter it won't work at all. I can't send it back with my Alterations but it won't work proper anyway so time for a new $300 saw. A bargain considering an ambulance ride is nearly $ 1500. $2000 if they give an Aspirin for the pain. For $57 I'll lick my wounds and be fine. I'll write it off as a bad-date.
Read less
Parts Used:
-
miles from BIDDEFORD, ME
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!