CS-420ES Echo Chainsaw - Overview
Models starting with CS-420ES
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Trimmer Spark Plug
PartSelect #: PS9263506
Manufacturer #: 15901019830
This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to in...
$6.40
In Stock
Leaf Blower Fuel Tank Vent
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$10.97
In Stock
Purge Bulb
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$9.80
In Stock
Nut Flange
PartSelect #: PS9236120
Manufacturer #: V265000200
This flanged hex nut is a genuine OEM steel fastener specifically designed for use in chainsaws and chop saws, serving the purpose of securing various components in these outdoor power equipment devic...
$6.40
In Stock
Fuel Filter Assy.
PartSelect #: PS16478678
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$11.70
In Stock
Trimmer Clip
PartSelect #: PS9261895
Manufacturer #: 13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers.
This part attaches to the fuel filter to secure the fu...
$6.40
In Stock
Bevel Gear
PartSelect #: PS9237267
Manufacturer #: V651000011
Genuine OEM replacement part, this part is sold individually. The Bevel Gear is part of the chain tensioning assembly of the chainsaws listed below. This part aid in loosening and tightening the chain on the chain bar.
$11.11
In Stock
Bevel Gear
PartSelect #: PS9246388
Manufacturer #: V651000001
This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an essential part of chain tensioner mechanism. When replacing this part you will need a screwdri...
$11.11
In Stock
Chain Adjustment Tensioner Bol
PartSelect #: PS9234675
Manufacturer #: V203000110
This is an Authentic Part sourced from Original Manufacturer designed for use with some Echo Chainsaws. This part is made out of Metal and it is Sold Individually. If the chainsaw bar doesn't adjust u...
$7.95
In Stock
Chainsaw Chain Tensioner
PartSelect #: PS9191505
Manufacturer #: C309000030
This is an Authentic Part sourced from Original Manufacturer. This part is made out of Metal and it is Sold Individually. If the chainsaw bar doesn't adjust when you turn the tension screw usually the...
$6.40
In Stock
Fuel Line Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$6.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
-
Richard from SPRING HILL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
13 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!