CP05G10 LG Air Conditioner - Overview
Models starting with CP05G10
Click on the best match to narrow your results.
- CP05G10 LG Air Conditioner (LG Air Conditioner Model CP05G10 Parts)
- CP05G10 (AWYAFRD) LG Air Conditioner (Residential Hvac)
- CP05G10A (AWYAORD) LG Air Conditioner (Residential Hvac)
- CP05G10A LG Air Conditioner (LG Air Conditioner Model CP05G10A Parts)
- CP05G10B (AWYAFRD) LG Air Conditioner
- CP05G10B (AWYAORD) LG Air Conditioner
- CP05G10B LG Air Conditioner (LG Air Conditioner Model CP05G10B Parts)
Keep searches simple, eg. "belt" or "pump".
Remote Control Assembly
PartSelect #: PS11760970
Manufacturer #: AKB73795706
This remote control is a device for adjusting your air conditioner settings. It requires two AAA batteries for operation. A malfunctioning remote control may have unresponsive buttons or signs of phys...
$46.34
In Stock
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
This spring clamp is designed for your room air conditioner. This clamp holds the fan blade on the motor shaft so it can rotate during operation. If your fan blade is wobbling on the motor shaft, you ...
$8.55
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
compressor staying on, even in OFF mode: failed compressor relay on Printed Circuit Board #EBR895407
PC Board #EBR895407 No Longer Available, replaced with #EBR7773051 - mirror image board, but wires long enough and connections same.
Unit unplugged: slide filter up and out. Remove two phillips screws behind where top of filter was to remove grill (easier done with magnetic screw driver). Remove two phillips screws, one each side, at ... Read more base of cabinet. Slide assembly out of cabinet 6-8". Remove phillips screw(s) on metal control panel housing. With needle nose, rock (2) main female spade connectors left/right until off (easier done with PC board still secured). Remove phillips screw holding plastic base of PC board. Viewing new board control connectors will simplify disconnecting the (3) control plugs. A small straight blade screwdriver can help.
Unit unplugged: slide filter up and out. Remove two phillips screws behind where top of filter was to remove grill (easier done with magnetic screw driver). Remove two phillips screws, one each side, at ... Read more base of cabinet. Slide assembly out of cabinet 6-8". Remove phillips screw(s) on metal control panel housing. With needle nose, rock (2) main female spade connectors left/right until off (easier done with PC board still secured). Remove phillips screw holding plastic base of PC board. Viewing new board control connectors will simplify disconnecting the (3) control plugs. A small straight blade screwdriver can help.
Read less
Parts Used:
-
Philip from NEW MARKET, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!