Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CHW9900WQ0

CHW9900WQ0 Whirlpool Washer - Overview

Get Parts and Repair Help for CHW9900WQ0

If you know the washer repair part you need, you can browse the list of all parts on the CHW9900WQ0, or you can search by name or part description. You can also find your part by where it is located on the CHW9900WQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for CHW9900WQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drain Pump - 120V 60Hz

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. It has two ports for water to pass through: ...


Door Strike

Used to help make the door stay closed. Sold individually.


Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...


Hose, Tub to Pump


Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature or amount of...



This hose can handle hot or cold water and is five feet long.


Clamp, Bellow To Tub



The door boot spring clamp or outer bellow clamp on your washer is designed to keep the door boot in place. It is circular in shape, and you will find it wrapped around the bellow. To remove the old clamp, simply open the washer door, and use a screwdriver to pop it out. This is an OEM part sourced directly from the manufacturer.


Temperature Sensor

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.


Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F 21 error

  • Customer: Andrew from St.Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 297 of 331 people found this instruction helpful
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. read more

water pump failed

  • Customer: Kurt from Caliente, NV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 68 of 73 people found this instruction helpful
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins. read more

Replaced Drain Pump on Whirlpool HE Duet Sport Washer

  • Customer: Shawn from Clyde, NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench set
  • 63 of 66 people found this instruction helpful
This do it yourself repair saved me the cost of a repair man's service call plus time to put it in. 1. First of all, make sure the unit is unplugged. On this type of front loading washer you will need to remove the bottom panel, which is secured by 3 nut screws. 2. Once the panel is removed you will need to use pliers to unscrew the drain plug and allow ... read more